New TM miniweb

[digidude]

Mini-Web allows you to quickly install images/software to your Technomate receiver without knowing the IP Address, by your PC. You can also edit CCcam and NewCamd config files and backup/restore your channel list.

 

[digidude]

Some working examples of the CS config editing pages

 

[coley65]

I like the look of that

Thanks
Coley

 

[Rumpelstiltskin.]

Thanks buddy, on top of the game as always.

 

[Rumpelstiltskin.]

Can you just enter the IP into web browser if you know it and enter that way Digi mate?

 

[simmo68]

Didn't work for me , it just came up fail. I'm using the latest image.

 

[digidude]

the latest image now has this fully incorporated into it, you have to hold the standby button on the front of the receiver while it powers up to access it, entering the receivers IP address into a browser when its already booted up will take you to the receivers web control interface instead

i had FAIL appear by letting go of the button too early, turning the power off and trying again gave the 2 digit IP in the window, and i could then access it fully

 

[eddcamm]

This is very cool :Clap:

 

[digidude]

now also supports simple editing of Camd3 config files AND NewCS config for editing RSA and Boxkeys for certain providors viewing cards

 

[danjel]

where do i get it mate? i need to download a new UR image?

 

[digidude]

where do i get it mate? i need to download a new UR image?

you have to hold the standby button on the front of the receiver while it powers up to access it, entering the receivers IP address into a browser when its already booted up will take you to the receivers web control interface instead

full instructions for ccessing the miniweb are in the pdf file in first post

 

[danjel]

you have to hold the standby button on the front of the receiver while it powers up to access it, entering the receivers IP address into a browser when its already booted up will take you to the receivers web control interface instead

full instructions for ccessing the miniweb are in the pdf file in first post

sorry if i didn't explain myself correctly.. i know how to do it.

my miniweb only edits cccam and newcamd.

so i guess i need to download a new UR image for it to have the camd3 and newcs.

 

[Rumpelstiltskin.]

 

[kiki009]

how do i get miniweb

 

[digidude]

turn off the receiver, press and hold the power button on the front, turn on the power, keep the button held untill you see a number in the display

on your PC open an internet window, and type in 192.168.1.number in display

 

[kiki009]

Thanks my friend digi i will give it a go:Hit:

 

[koceuk1]

im pressing and holding stand by button and than im powering on my reciver and after while only 2 digits comes on the display (66) im typing this on my browser 192.168.1.66 and my browser cannot conect...ive tried all posibile ways for puting images on my tm 600 but unsuxsesfully..this is my 4th day how im trying and my head is in mess .PLEASE PLEASE SOMEONE HELP ME..im newbee with linux recivers...THANKS TO ALL IN ADVANCE FOR YOUR HELP

 

[ToneDeff]

i think the Mini-Web will only work with UR images, didn't for me on retail one anyway. could be why your getting that error although i've not seen any else post with "66"

tried to pm you to see if i could help over msn but u've not got enough posts/points w/e it is to have pm's enabled yet :/

have you tried with "TM Loader" over network, that's method i always use.
https://www.digitalworldz.co.uk/index.php?threads/208797/

 

[digidude]

try 192.168.0.66

the miniweb does work on the factory image, but you only have the option to update firmware

 

[jasont68]

sometimes i cannot get straight into it !! i have to enter my ip address 2 or 3 times keep getting connection errors then it will eventually work

jason