PaphosAL
Veteran flasher
- Joined
- Jan 22, 2006
- Messages
- 1,598
- Reaction score
- 399
Glad you got it sorted, Jaffa! It looks like lincsat is right- and some areas and/or boxes prefer mgcamd menu support. He won't mind if I take a leaf outa his book, and include this next time around...
Rodboy- have you tried all the available Video Output options in Screen Settings, m8? On another board, a guy said this was the best picture quality he'd ever seen- and he's running a 42" Plasma!
Scanning:
@Renny: Good point, m8. Anyone having probs Scanning after Set my Location and who know their NetID, Frequency and SymbolRate are 100% accurate, then you could try a manual setup (which always works for me).
FTP into /var/tuxbox/conf and edit the settings I've marked in red to your known local settings in the scan.conf file...
TP_fec=3
TP_freq=643000
TP_pol=0
TP_rate=6887
TP_satname=
TP_scan=0
bouquetMode=2
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=00005
satCount=0
satNameNoDiseqc=Virg*n Media
scanSectionsd=0
scanType=0
scan_mode=1
Mimic all the other dark blue settings as above- and make sure the green item reads like mine. (replacing the * with i of course; this is board safety in action). This links into the cables.xml file and will enable you to toggle to another provider if you are NOT 6887 nor 6952 (VM)
Then SAVE the file and Reboot your box (or the changes won't work!), Then try a Scan again.
##COMPETITION##
Nobody has mentioned the scrolling Boot Info screen yet... Where did I nick this format from???
Cheers- AL
Rodboy- have you tried all the available Video Output options in Screen Settings, m8? On another board, a guy said this was the best picture quality he'd ever seen- and he's running a 42" Plasma!
Scanning:
@Renny: Good point, m8. Anyone having probs Scanning after Set my Location and who know their NetID, Frequency and SymbolRate are 100% accurate, then you could try a manual setup (which always works for me).
FTP into /var/tuxbox/conf and edit the settings I've marked in red to your known local settings in the scan.conf file...
TP_fec=3
TP_freq=643000
TP_pol=0
TP_rate=6887
TP_satname=
TP_scan=0
bouquetMode=2
delivery_system=0
diseqcMode=0
diseqcRepeat=0
netid=00005
satCount=0
satNameNoDiseqc=Virg*n Media
scanSectionsd=0
scanType=0
scan_mode=1
Mimic all the other dark blue settings as above- and make sure the green item reads like mine. (replacing the * with i of course; this is board safety in action). This links into the cables.xml file and will enable you to toggle to another provider if you are NOT 6887 nor 6952 (VM)
Then SAVE the file and Reboot your box (or the changes won't work!), Then try a Scan again.
##COMPETITION##
Nobody has mentioned the scrolling Boot Info screen yet... Where did I nick this format from???
Cheers- AL
Last edited: