- Are the above bytes not for a sammy? If so, could you please post the 4000 one!
- @ Satch, have you used this macro file? Is your net id 41047 and did you simply send the dump to your box using OCD?
Thanks all,
V.I.P
Yes, I know i've had lots of 'Final' questions, I just like to be certain about everything!
Clive,:Laugh: Yes i think it was the amount of final questions that made me tiered and i gave you the sammy bytes soz about that, i used the funcard to set my net id ok, i dunno who told you it dont work but if its not for you, you could try researching (by using the search button) the libby way of doing it (you will need to buy a scart to serial adapter for about £10)
I remember now that i didnt use that 4k macro.rar to send to my 4k it was a special universal one which i won't be releasing (because i dont have the permission of the author to do so) so don't PM me about it ok.
Clive.
- Are the above bytes not for a sammy? If so, could you please post the 4000 one!
- @ Satch, have you used this macro file? Is your net id 41047 and did you simply send the dump to your box using OCD?
Thanks all,
V.I.P
Yes, I know i've had lots of 'Final' questions, I just like to be certain about everything!
HiYa,
I have used that file (Mine didn't work)??? TBC Help...LoL
Sorry v.i.p I'm pure so the netid sets it's self as you know. But I would think it will work straight away for you.
I tried the 09999 file this morning to see if I could set the netid with a funcard but couldn't get that to work (Got the card is blacklisted in the EM)?
Maybe using the wrong netid software? But Funny didn't try it with the 41047 Mac...LoL
Good Luck
So if your uploading i assume you have sorted out the connection problem yes?
In my tut is says "don’t forget to name the file and remember where you saved it and to check it is in the format of an “.s19” file." but if you didn't then once its uploaded the flash just look in the Upload Complete screen where it says Upload Flash to: and write it down if need be ok.
If you've passed this point then you can either do it again and pay more attention next time or search your pc for the s19 file.
Clive.
could you help me with the connection first many thanks QUOTE]
? I dont know anything about how you've setup your jtag so thats going to be hard for me aint it but you can search for jtag for the settings and common sense tells you that you heve to have a good constant connection on the test points.
Mac-Mot, I've attached but you might not need it but as i dont know hardly anything about your pc or system i cant say you do need it, it was just a guess on the little bit of info you gave us.
Clive.
could you help me with the connection first many thanks QUOTE]
? I dont know anything about how you've setup your jtag so thats going to be hard for me aint it but you can search for jtag for the settings and common sense tells you that you heve to have a good constant connection on the test points.
Mac-Mot, I've attached but you might not need it but as i dont know hardly anything about your pc or system i cant say you do need it, it was just a guess on the little bit of info you gave us.
Clive.
ok scrap last post got connection sorted !!!!!
ok where was i ?
oh yer makine this file i followed the tut and saved it is that correct then go to upload flash and it doesnt see the file wot have i missed ?
follow tut exactly how do i make that s19 file ?
thanks
Did you use macmaker to convert your .s19 file to a macro for ocd?
when i saved my file i called it mydump.s19 . make sure you put the .s19 in the name and see if that works.
We use essential cookies to make this site work, and optional cookies to enhance your experience.