My First Samsung 2100 JTAG, Is this right ?

PSE2005

Inactive User
Joined
Mar 6, 2005
Messages
44
Reaction score
0
Location
Staffordshire
Hi guys, After a little advice please,

I have just completed what i believe is correct procedure, according to various posts and threads i have read up on,

I am sure that the information BK i have extracted might be incorrect,
As this is my first attempt i dont want to screw it all back together and have to rip it all apart again..

Using BKE2.2 and a TMC solder JTag adapter. i got this result

On this option - "Samsung 2100 "DAVIC" - Gives this result

IRD 3E XX XX XF "Blanked out by me"
BK EA AA AB AA 55 55 55 15

On this option - "Samsung 2100 "exCW" - Gives this result

IRD 3E XX XX XF "Blanked out by me"
BK 00 00 00 00 00 00 00 00

I k now the IRD is 100% correct, as i have already obtained that with a hex calculation

I can only get a result when i use the first option, however I am in a ex C&W area

Does this seem correct, or am i just being stupid, And advice is really appreciated


Thanks guys
 
Last edited:
Hi guys, After a little advice please,

I have just completed what i believe is correct procedure, according to various posts and threads i have read up on,

I am sure that the information BK i have extracted might be incorrect,
As this is my first attempt i dont want to screw it all back together and have to rip it all apart again..

Using BKE2.2 and a TMC solder JTag adapter. i got this result

On this option - "Samsung 2100 "DAVIC" - Gives this result

IRD 3E XX XX XF "Blanked out by me"
BK EA AA AB AA 55 55 55 15

On this option - "Samsung 2100 "exCW" - Gives this result

IRD 3E XX XX XF "Blanked out by me"
BK 00 00 00 00 00 00 00 00

I k now the IRD is 100% correct, as i have already obtained that with a hex calculation

I can only get a result when i use the first option, however I am in a ex C&W area

Does this seem correct, or am i just being stupid, And advice is really appreciated


Thanks guys

Are you using the latest C&W bytes?
 
Plenty of stuff in the sammy section with this prob,use the correct bytes also make sure the box is on the correct software for area.
Its no good using ex-cw bytes on a box from pure area.
 
The 2100 is from an ex-cw area, I am pulling me hair out here, lol


Been searching all over since making this thread. and tried all kinds of ideas.. GRRRR...
 
look in the engineers menu for the box software see what it is on
 
I think i have cracked it this time,

Its giving me the correct IRD, and this is the BK its now giving me for Ec C&W is , removed davidh
Thats looking sommat like, I think.. lol I used the following bytes excw 3_2B
0x00942d24 8


software was 3_2B_P12N_5100
 
Last edited by a moderator:
only way to know for sure is try it and keep your fingers crossed the bk looks a bit iffy to me but who knows might just be right
 
I think i have cracked it this time,

Its giving me the correct IRD, and this is the BK its now giving me for Ec C&W is , removed davidh
Thats looking sommat like, I think.. lol I used the following bytes excw 3_2B
0x00942d24 8


software was 3_2B_P12N_5100
i removed it m8 dont want the cc's to see

try it with a funcard see if it works
 
Back
Top