VU+ Solo2 vusolo2 clone brick

[basilico1]

Hello
I normally turned on the decoder but it stopped at startup so I turned it off and on again and the display no longer starts and does not even recognize a USB
key but the dim orange light of the "button" on the left display remains. I downloaded solo2 flash mcu tool and here then I get lost because I don't know how to do with update.exe and 808.bin. If I start hyperteminal with a null modem serial cable, I get the serial number of the box and stop there

 

[Ferret]

Hello
I normally turned on the decoder but it stopped at startup so I turned it off and on again and the display no longer starts and does not even recognize a USB
key but the dim orange light of the "button" on the left display remains. I downloaded solo2 flash mcu tool and here then I get lost because I don't know how to do with update.exe and 808.bin. If I start hyperteminal with a null modem serial cable, I get the serial number of the box and stop there

Search Lorinson in the search bar lot for you to read.

 

[basilico1]

sorry but I tried to search but it is not clear to me. the chip that is mounted on the clone is k9f2g08u0c samsung 325 and when I connect the box with the null modem serial cable with hyperteminal only the serial of the box comes out, so I guess the chip is blown? .
Since the samsung 325 cannot find a compatible one and what is the procedure?

 

[Ferret]

Apologies but we were playing around with these and jtag back in 2016, to help you i would need to reread all the information posted back then. Better you do it.

Youll need a new nand finding one should be easy on Aliexpress

You will need BB3 software with the correct chipset driver BCM*****.msi for the solo 2 and a Cypress EZ-USB FX2LP CY7C68013A USB2.0 Development Board to flash the new nand.

 

[Ferret]

Some info on nand here

Vu solo2 clone nand chip lonrisun
here on solo2
Solo2 Jtag
Jtag files
JTAG files VU solo2 Clone

 

[basilico1]

Apologies but we were playing around with these and jtag back in 2016, to help you i would need to reread all the information posted back then. Better you do it.

Youll need a new nand finding one should be easy on Aliexpress

You will need BB3 software with the correct chipset driver BCM*****.msi for the solo 2 and a Cypress EZ-USB FX2LP CY7C68013A USB2.0 Development Board to flash the new nand.

then the problem that he could not connect was that being a clone the null modem cable went with the pins reversed and in fact by doing this he recognized it with the flash mcu tool and the answer was this

f you want to download bootloader to flash please press the keyboard 012345
===============================================================================



Mcu connect to the flash Failure!
Download Image To the Flash (press '1' to s
tart)

Waiting for the file to be sent ... (press 'a' to abort)
CCCCCCCCCCCCCCCCCCCCCC

looking on the sales sites I find it with k9f2g08u0c but not Samsung 325 but rather with other numbers such as samsung 319 I do not know what are the differences and if it goes well the same

so even if with mcu flash tool it works and I have the bootloader for lorinson it always takes BB3 software with the correct chipset driver BCM and Cypress EZ-USB FX2LP CY7C68013A?