Android Egoiggo S95 X PRO TV Box upgrade firmware

jfish

VIP Member
VIP Member
Joined
Sep 21, 2007
Messages
3,203
Reaction score
699
any custom firmware for the Android TV Box Egoigoo S95 X PRO Android TV box

running v6 at moment, want to update to v9 if possible
 
managed to install an custom ROM based on v9

Initially the wifi didnt workk, the devs asked me for some more info and they have released a new version to support the wifi in my box

If anyone interested I can provide a guide

will need a USB Type A male to male cable and use laptop to flash image
 
What site did you find that on? I looked and couldn't find anything for the Egolggo, there were s95 images but they were only 7.1. @jfish
 
I'll take a look see if they have an image for mine better than v7.
 
I'll take a look see if they have an image for mine better than v7.
 
managed to install an custom ROM based on v9

Initially the wifi didnt workk, the devs asked me for some more info and they have released a new version to support the wifi in my box

If anyone interested I can provide a guide

will need a USB Type A male to male cable and use laptop to flash image
Could you Please send me a guide of how to flash a EgoIggo. Currenly I have no operating system to reflash I've tried several meathods and nothing works. I have managed to get the bootloader to run TWRP but nothing else and manged to connect to USB burning rom.
I need the correct zip or image file.
i could not get the image to link but below is a link to it on my onedrive.
USB burner screenshot.png
 
If You use the @ sign before a users name it will make sure they see your post @moogski, and @jfish.
 
I
If You use the @ sign before a users name it will make sure they see your post @moogski, and @jfish.
@jfish
I have down loaded the img file from this site and I'm still getting the same error on the burning tool


[20:46:04 802][HUB7-3][Err]--IOCTL_IDENTIFY_HOST_Handler ret=-116 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: The I/O operation has been aborted because of either a thread exit or an application request.



[20:46:04 802][HUB7-3][Err]--Identify status failed
[20:46:04 902][HUB7-3][Err]--[0x00101004]Erase bootloader/Lowper/Identify/Error result
[20:46:04 913][HUB7-3][Inf]--Close device handle 0x0000049c
 
[20:46:04 902][HUB7-3][Err]--[0x00101004]Erase bootloader/Lowper/Identify/Error result
does this mean i have low power on my hub so it can't burn the image or anotger reson ?
 
Back
Top