DW Sat Installer List

I need a bit of help in regards to setting up a 1.2m dish @ 4.8e in the west midlands (cov) - if you have a sat meter and can help please get in touch will cover petrol costs / and make you cups of T :BLOBBY:

Thanks

-Badaman
 
Anyone in Leeds/Bradford Region. To install full motorised satellite system/and advice and pointers on which one to buy. Free tea. But also Beer Tokens !
 
after someone to help me out here in bolton lancs i have a 1.2m dish need some help getting it all aligned anyone help
much app, i had a smaller dish i got that one aligned up but this dish i am struggling with the motor on the pole getting it straight i dont know if it would be better on the chimney just want some one with the expertise ta
girl friend sick of the back teeth im always out messing with it anyone help me out i have ladders cheers
 
anyone around burnley area who can give me a hand in a couple of weeks
i wanna take me dish and motor down,and put the dish back up with a multi lnb
will sort you out with beer tokens if intrested
 
pgtips1975 & Magnu420

I can help you if required but not for beer tokens sorry as its my Job i would of course offer my services at a reduced cost for forum members, But what i would stress is to seek help first from one of the Guys who volunteer mainly for free and are listed on the first page. pgtips1975 i believe that MDT has already offered to help you so you should be ok if not well you know where i am.

Like i said try and get help for next to nothing first if your still struggling then i can make myself available, Your first option really is to attempt it yourself and gain the satisfaction of completing your own install.

Good Luck
 
pgtips1975 & Magnu420

I can help you if required but not for beer tokens sorry as its my Job i would of course offer my services at a reduced cost for forum members, But what i would stress is to seek help first from one of the Guys who volunteer mainly for free and are listed on the first page. pgtips1975 i believe that MDT has already offered to help you so you should be ok if not well you know where i am.

Like i said try and get help for next to nothing first if your still struggling then i can make myself available, Your first option really is to attempt it yourself and gain the satisfaction of completing your own install.

Good Luck




ive already been m8 and im going back a week on sunday as the motor was shot(ive never seen so much play in a motor stub, a tm2600) and a new set of t+k,s are being sourced as the L+T bracket combo was a hodge podge and far from ideal. i have to say that @pgtips1975 is a fantastic fella and im glad i can help him out, regards mdt
 
ive already been m8 and im going back a week on sunday as the motor was shot(ive never seen so much play in a motor stub, a tm2600) and a new set of t+k,s are being sourced as the L+T bracket combo was a hodge podge and far from ideal. i have to say that @pgtips1975 is a fantastic fella and im glad i can help him out, regards mdt

Hi mate,

Sometimes the Motor stubs on the TM's start working loose due to wind backlash some can be fixed by tightening the centre motor stub bolt with an alan key as a few do work loose, otherwise its hammer and screwdriver time in the backlash adjustment.

The darkmotor dont have this problem as they have a built in automatic backlash adjustment via a spring loaded mechanism, If your getting a motor for the Job then for an extra tenner get the superior darkmotor.

best of luck MDT
 
Hi mate,

Sometimes the Motor stubs on the TM's start working loose due to wind backlash some can be fixed by tightening the centre motor stub bolt with an alan key as a few do work loose, otherwise its hammer and screwdriver time in the backlash adjustment.

The darkmotor dont have this problem as they have a built in automatic backlash adjustment via a spring loaded mechanism, If your getting a motor for the Job then for an extra tenner get the superior darkmotor.

best of luck MDT





i advised him on a darkmotor but he doesnt want to and his sourcing his own against my recommendation but its his money/system and its up to him how he goes as i can only install what i am asked to, regards mdt
 
Just thought I would add i am willing to help members out in the west midlands area setting up dishes ect.

All I ask is my petrol money is covered ... Would be easier if the person have there own ladders as it is cheaper for me to run the motorbike,

Bacon Sarnies and Tea and the odd beer will keep me happy :drink:
 
Anyone around the sunderland area got a few pointers for me,
what dish / box etc etc.
I am very new to this as coming from the cable scene :(

Thank you in advance
 
Guys
im after some help with a 1.1 metre dish it is already up but cannot get anything other than 28e it is brand new and just needs aligning by someone who knows what they are doing im near warrington if anyone can help please reply or pm me.
thank you very much.
 
Re: DW Sat Instaler List

Anyone in Belfast willing to help me install a Motorised dish ?

It will be an 80CM dish.

Cables are already up as I can use my current Sky cabling.

Thanks.
 
Re: DW Sat Instaler List

i'm in birmingham, if anyone needs help.

ps...... funny thing is, today a mate asked if i'd interested in doing a job for someone in belgium. i said yes, as long as they'll pay for the flight.

Need help with my sly dish.... Would you or anyone from birmingham mind taking a look, check if equipment is OK and direction is right and also if any thing needs upgrading and general advice on motorised dishes etc.... get signal issues sometimes... willing to offer tea/coffee, sorry don't drink so can not offer you any alcopops or similar.... :thankz:
 
Install's in Belfast and most of NI..multi-sat,motorisied single dish cat 5/6 etc all done...
 
Are offing this free of charge? or is it first post in two years to tout for business?
I have posted the same on other forums just trying to help people. No doubt you go out and work for nothing in the morning. If you're unhappy with the post remove it. But Yes if people have tried and need a hand I can help.
 
I have posted the same on other forums just trying to help people. No doubt you go out and work for nothing in the morning. If you're unhappy with the post remove it. But Yes if people have tried and need a hand I can help.

Chis I have no problem if it is your living, just say if it is so people know that they will be expected to pay you with money not cups of tea.
 
Back
Top