Vu+Duo - Problem with tuner since upgrading to BH 2.1.4 image

44matrix

Inactive User
Joined
Oct 5, 2015
Messages
5
Reaction score
1
Not sure if any one here has had any experience with this problem - so let me describe it fully -

My Vu+Duo - original box has worked for years without any problems.
Recently - I notice after trying several images including Vix, VTI and Open ATV - I then settled on BH 2.1.4

I installed Cats Eyes settings for 28.2E - all channels are working as expected.

After reboot - even BBC HD stopped and the channels come and go frequently.
The signal keeps fluctuating and I see on the forums that other ppl having same problem and not sure why.

If I scan for channels - I get about 10 channels only - Channel 4, more 4 and channel 4+1 (e4) - many times the same channel)

If I stick my other boxes on the same feed - I get all the channels. DM 500S Ok and SkyBox F5 ok.

What is wrong with my Vu+ Duo box.

The channels work when in standby via Web streaming also - but after sometime they become glitchy and lose strength.
If left for a while - they begin to work again for about 15 mins then same thing happens again - like a Virus!!!
 
try a clean install of any image with no backup just setup from scratch I had a similar problem losing channels and no tuner lock using vix hades 18 on my solo2 after updating to openvix 3.2 and clean set up it is fine
 
try a clean install of any image with no backup just setup from scratch I had a similar problem losing channels and no tuner lock using vix hades 18 on my solo2 after updating to openvix 3.2 and clean set up it is fine

I think that I already done that. I even removed my old 500GB HDD disk in case something was lurking in there.
I re-installed BH 2.1.4 image via USB - and selected not to restore my old settings.

It still behaves the same way. The only way for me to get the channels is via cats eyes settings Enigma 2 for 28.2E - by Blue panel. The channels continue to work - but only for about fifteen minutes at a time.

The signal strength is strong at first ~80%; then it gradually ebbs away to about 35-36% and at that level the images start to break up and I lose the channel.

If I switch the box to standby for sometime - then everything reverts to normal again. Maybe after 20mins to half an hour.

It is the most bizarre gremlin that I have ever experienced in anything!!!

- - - Updated - - -

Maybe it is something in that BH 2.1.4 image with bad drivers for the tuners or something. I think that the next thing to do is to try another image.

|Although - I really like BH.
 
Back
Top