kimhthwy1958
Inactive User
hi guys i have a 1996 ford mondeo with central locking but that is not working now i had to put new batteries in the key now i need to know how to programme
it to get the central locking to work does any know how to do this that live in the Nottingham area or is there a guide i can follow for this
thanks
i have tried
* Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
* Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
* With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
* Turn the ignition back on to exit programming mode
but dont work
it to get the central locking to work does any know how to do this that live in the Nottingham area or is there a guide i can follow for this
thanks
i have tried
* Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
* Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
* With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
* Turn the ignition back on to exit programming mode
but dont work
Last edited: