oscam and no plugins to download

dont do it it"ll hurt

VIP Member
VIP Member
Joined
Nov 16, 2006
Messages
8,315
Reaction score
1,130
Location
in a house
so after as great deal of help in another thread which i think solved the problem
and thought it best to start a new one
i have downloaded oscam and installed but when trying to set up it says no config found
i know it needs an oscam.config file ( which i cannot find or make )
i used cccamtooscam to convert line but this does not make a config file just server and user
even when i installed oscam 1.00.3199 this did not make one either
i used plugins to try and down as i normally do but no plugins appear when pressing green
can anyone shed some light on the two items above
 
What image mate you may have the cfg location wrong.

Ok the three files you need are the user, server and conf files.

When you have edited these you need to FTP them to var/etc/tuxbox/config

Your user files should look like this.

Oscam.user

[account]
description = dvbapi
user = dont do it it"ll hurt
group = 1
keepalive = 1

Your conf should look something like this

Oscam.conf

[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dont do it it"ll hurt
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

[newcamd]
port = 10001@
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1


If you were given a nline like this

N: sever.dyn.dns.com 1234 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[reader]
label = Mynewcamdreader
enable = 1
protocol = newcamd
device = sever.dyn.dns.com,1234
key = 0102030405060708091011121314
user = username
password = pass
group = 1
 
Only image ive never had the pleasure of

The above can be edited with your details and pasted into a blank document in Notepad ++ and id then transfer them the three files to var/etc/tuxbox/config

Let us know what it reports then.
 
still comes up the same no config found defo in the right place ect/tuxbox/config
sorry edit
not trying to set up as server just to receive
 
still comes up the same no config found defo in the right place ect/tuxbox/config
sorry edit
not trying to set up as server just to receive


They may need to be in a folder called oscam in ect/tuxbox/config, at least thats whats needed in Openpli on a dm800se
 
Need to make each line a different group too i.e. On your first entry group = 1
Second group = 2
And so on


Sent from my iPhone using Tapatalk
 
ok so i'm still on with this

here is the updated and what is left to figure out
flashed with vix project 2 have set it up and abm is working fine alla cable channels are there
service scan works but have to set frequ to 115 not 562 but it auto set to 562 so happy
here is what is left
the other thing is i thought bbc news was a fta but this does not come on
channels 1-5 work fine
any help would be greatful
i downloaded oscam.ipk and have it installed but it will not go active it does say it is setting it as active but sits at selected and no further ?
 
was not sh4 bud looking for one now
thank you i knew i would mess it up lol
@Abu Baniaz looked at the utube vid but when i try to download plugins it comes up blank with no plugins at all
 
Last edited by a moderator:
So long as you get an SH4 version of oscam, you will be OK. The config files have been posted already.

P.S
If you are using ABM, why are you scanning? No need for both!
 
Back
Top