How to use PPV ID creator & put them on to M.O.S.C

M

Mickyb2001

Guest
1)Open up I**ppvID

2)Click on the box next to EVENT ID and select 62.

3)Now click on Create ID's

4)Then hilight the generated numbers and pres CTRL & X

and that is you now got this months PPV codes and follow my turtorial below------------->

&gt;------------FOR PPV ON M.O.S.C---------&gt;<br />1)Get PPV ID'S(As told above or if you cant be bothered to doit e-mail me)

2)Connect to your card using MKF V4.3 and click on settings and then extract your system key

3)Now click on ON D!G!TAL 1, and click on PPV.<br />Then you will see three tabs,click on PPV Event.

4)Click on the bit that says Multiple BX,Then copy the PPV ID'S that i send, Then paste them into the box, and click on create records.

5)It will take 2-5 minz to do this,and when it is finnished hit disconnect.

******NOTE******------&gt;When !** change the codes you will have to delte the PPV id's you have allready entered and add the new ones they have been changed to!

<br />Oh yeah one more thing

HAPPY VIEWING <img src="eek.gif" border="0"> <img src="graemlins/hapsad.gif" border="0" alt="[hapsad]" /> <br />Crack£r

If you find this helpfull pleaze rate me but if you dont want to i dont really care <br />E-MAIL ME HERE MIC**[email protected]

[ 16 November 2001: Message edited by: Crack£r ]

[ 19 November 2001: Message edited by: Crack£r ]</p>
 
FOR PPV ON M.O.S.C---------&gt;<br />1)Get PPV ID'S(As told above or if you cant be bothered, Download them from the downloads section)

2)Connect to your card using MKF V4.3 and click on settings and then extract your system key

3)Now click on ON D!G!TAL 1, and click on PPV.<br />Then you will see three tabs,click on PPV Event.

4)Click on the bit that says Multiple BX,Then copy the PPV ID'S that i send, Then paste them into the box, and click on create records.5)It will take 2-5 minz to do this,and when it is finnished hit disconnect.<br /> &lt;----------******NOTE******------&gt;<br />When !** change the codes you will have to delte the PPV id's you have allready entered and add the new ones they have been changed to!<br />Oh yeah one more thing

HAPPY VIEWING

Crack£r

If you find this helpfull pleaze rate me but if you dont want to i dont really care <br />E-MAIL ME HERE MIC**[email protected]
 
Cracker

I think I've followed your instructions to the T

However when I go onto any Select channel I am asked to enter my PIN which I do and it then takes me to the ordering screen where I have to enter my pin again . It then takes me to a screen where I can either order by phone or remote

Entering either of these option get me nowhere

Any clues as to the problem . Is it the programming of the event ID'S on the card or somethin far more obvious that I am doing wrong
 
I had the blue banner repeating itself....(keep arearing after pressing select)

What i did was go to the channel i wanted to watch eg. 51 and hold in select and the blue box came up saying enter pin to WATCH<br />problem solved,<br />Please make sure it is the 61 bx codes you have and not 51 cause i done that the first time

Crack£r
 
added 61 ids to card last night it worked ok ,today wont work on ppv channels. have they changed the ids and if so how do you find out what the new ids are any help please m8ts
 
Crack£r were do we get the bx codes now that the download section has gone?
 
m8,

To get the current bx code preview a ppv movie and read your card in mkfv4.3 as usual.

It helps (but not essential) if you remove all old bx entries before you preview so the only record you should have will be the preview you have just made.

Go to the ppv section and get records.<br />You will see a record for the movie that you have just previewed.

Look at its ID (can't remember which exact box at the bottom) and it will consist of 4 characters the first two numbers are what you want.

Use the ppvid generator from cr0wman and you have the bx codes to do with as you please.

<img src="smile.gif" border="0"> <img src="wink.gif" border="0">
 
going to try the ppv calc this month. I take it that 62 is dec 63 is jan etc ?????
 
hi

i tried to put in the ppv id but it wont let me program all the ppv id (62), it does about half and then it says error, can someone help?
 
Try removing all of the old ones first and increase time out to about 350. Let me know if this helps.
 
no it didnt work i tried increasing the timeout setting (this setting is showed when u try to get the the card firmware) it says unknow error from card
 
Back
Top