oad the humax firmware "ToH3.2_HoT1.2.hdf" with HU1.5 and verify it is an offical release
When the upload is finished turn the box on and the run "DSR 9500 EMU Ed27D for Humax.exe" its in the emu keys folder.
open the key.bin file and send it to the humax, when its done put the humax in standby and it will write the keys to flash.
Now turn the humax on again and go into the menu ToH > Config
At the bottom you will see the option caid preselect, set this to EMU+K and exit then stick a 6in1 funcard in the slot and you should get the emu going.
The emulation needs a card in the slot to work but this could be any irdeto based card be it a 6in1 fun, ds9 silver or even an irdeto goldcard hex i believe.
If it doesnt clear straight away try pressing 0 RCL to reset the cam and see if that sorts it.
thanks for this u know who u r
happy viewing
When the upload is finished turn the box on and the run "DSR 9500 EMU Ed27D for Humax.exe" its in the emu keys folder.
open the key.bin file and send it to the humax, when its done put the humax in standby and it will write the keys to flash.
Now turn the humax on again and go into the menu ToH > Config
At the bottom you will see the option caid preselect, set this to EMU+K and exit then stick a 6in1 funcard in the slot and you should get the emu going.
The emulation needs a card in the slot to work but this could be any irdeto based card be it a 6in1 fun, ds9 silver or even an irdeto goldcard hex i believe.
If it doesnt clear straight away try pressing 0 RCL to reset the cam and see if that sorts it.
thanks for this u know who u r
happy viewing