how do i re-flash dreambox 500c

gamston

Inactive User
Joined
Mar 27, 2006
Messages
14
Reaction score
0
hi all
m8 got a dreambox 500c that was flashed with 2.0v,
but did not know how to set it up,and has been trying all week, now the dreambox just sits on the neutirino 2.0 v logo screen
so i think its a re-flash,
can anyone point me in right direction for guide and software etc

thanks
 
hi guys. same problem here. got 2 dm500c's got 1 working and made a backup image from it as my other was just stuck on the boot screen. so flashing using dreamup and restoring the backup image i have, but after a minute into restoring backup it stops and give the ABORTED BY USER error.

anyone have any ideas pls?
 
hi guys. same problem here. got 2 dm500c's got 1 working and made a backup image from it as my other was just stuck on the boot screen. so flashing using dreamup and restoring the backup image i have, but after a minute into restoring backup it stops and give the ABORTED BY USER error.

anyone have any ideas pls?

try using dreamUp 1.3.3.4 instead of 1.3.3.5
 
hi guys. Same problem here. Got 2 dm500c's got 1 working and made a backup image from it as my other was just stuck on the boot screen. So flashing using dreamup and restoring the backup image i have, but after a minute into restoring backup it stops and give the aborted by user error.

Anyone have any ideas pls?

hi mate rename the image or change last name after.img its should work
 
loaded new image
did scan, that all worked ok
could only view FTA channels

been trying to put in magic files, and i just cannot connect to dreambox, tried dreamboxedit, filezilla, dcc, just cannot connect to dreambox

not got much hair, dont want to pull out what i have
 
there ya go mate!!!!!!!
 
Last edited:
loaded new image
did scan, that all worked ok
could only view FTA channels

been trying to put in magic files, and i just cannot connect to dreambox, tried dreamboxedit, filezilla, dcc, just cannot connect to dreambox

not got much hair, dont want to pull out what i have

dl flash xp mate, set the ip of your netwrk card 1 up ro below from the one of the box and it will connect. This will need a cross over cable.

When using dcc what steps are you doing? what bit is it failing at?

or if you can get your pm set up I will sort you out.
 
thanks rodbouy,
found out how to change my ip addy, and could see dreambox files with fxp,

but still can't get the dreambox to play al the other channels

used an AU image, but still no good,
trouble is i do have cable so can only test dreambox if m8 is at home
 
thanks rodbouy,
found out how to change my ip addy, and could see dreambox files with fxp,

but still can't get the dreambox to play al the other channels

used an AU image, but still no good,
trouble is i do have cable so can only test dreambox if m8 is at home

tell you what, create a dummy email. click my name a send msg, I will then email you and delete the email.
 
Back
Top