Cheap Linux Receiver Eagle For £79!

geeuk

Inactive User
Joined
Nov 29, 2005
Messages
798
Reaction score
2
Location
UK
Hi guys,

Just seen alsat selling this new linux receiver which they have relased! for £79 you can't go wrong! and it supports the dm500 images....

EAGLE LINUX RECEIVER
 
Hi guys,
Just seen alsat selling this new linux receiver which they have relased! for £79 you can't go wrong! and it supports the dm500 images....
EAGLE LINUX RECEIVER

Looks like a clone of the DM500. Darkman has probably bought a load of them from manufacturer in China with this new branding and is passing it off as a new product. Good price though.
 
Doen't look anything like a DM500 to me, at least not the one thats sitting under me telly.
If they had put a USB prot on, they'ed sell shedloads.
 
obviously it dosent look like the dreambox under your teli the outside is different! lol hope i stated this when posting! lol thinking to order one and get into the card sharing scene!
 
I wonder if anyones ordered one yet it will be nice to see the results?
Might have a bash myself. ive lived with a relook with headaches ,so i might try where Eagles dare
Regards Boris
 
Is it the price why people are looking or is it cos they want to try out a different box as my dm500s only cost 85 quid.
 
Hi Guys

I may buy one of these eagles shortly, as when not on offer they will retail at 99 quid.
I,ve only just gone into linux based ( dm7020 ) and i like what they can do, so i could
play with the eagle when i have sussed the dm. Another thing which is good about
the eagle, thats with it coming from als*t, you know it will have plenty of support.

Fezzy: multi :
 
Got mine come yesterday, same as what it says it does, and for £89-00 inc p&p
not bad i think,
Regards Boris
 
Got one last week works a treat run`s D500 images and plugins easy to set up and quite a good tuner had no problems finding sat`s etc BARGAIN.
 
hi,
when can we get a cable receiver as cheap as eagle?
will they make a cable version?
 
New Linux Eagle box

New Box, Eagle Linux Box -Linux ,compatibile with all Images Like -Gemini,Colosoum and Dm 500 Images.

Price: £79

The Eagle Box is Linux satellite TV receiver, with 1 x Smartcard-Reader.
250 MHz IBM PowerPC Processor (350 Mips)
2 LED status
Linux Operating System
Full automatic service scan
Supports directly bouquet-lists (indirect unlimited)
Supports multiple LNB-Switching control (supports DiSEqC)
1 x Smartcard-Reader
Unlimited channel lists for TV/Radio
SPDI/F nterface for digital bit stream out (AC-3 / DTS)
MPEG2 Hardware decoding
Channel-change time < 1 second
Fully adaptable OSD in many languages (skin-support)
100Mbit full duplex Ethernet Interface
Supports EPG (electronic program guide)
1 x Scart-interfaces (fully controlled by software)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent +/- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%
 
Back
Top