800se sunray triple tuner cable issue

falconxxx

Inactive User
Joined
Jul 16, 2013
Messages
6
Reaction score
0
hi tried several images old and new open pli2 and 4 , ATV blackhole etc.. also old cables.xml and new but cannot scan any channels , put in network ID frequency manually and also updates the 1.03 SR4 triple tuner ... running out of options , can anyone please advise if they have a working image on this box ?

thanks
 
Triple tuner on 800se that don't sound right, how are tuners set up there

Sent from my SM-G920F using Tapatalk
 
Triple tuner on 800se that don't sound right, how are tuners set up there

Sent from my SM-G920F using Tapatalk

There is a triple tuner on the sr4 S C & T supported tricky to setup though as you need to manually scan with know parameters frequency,QAM,FEC etc autobouqets wont work on them.
 
hi tried several images old and new open pli2 and 4 , ATV blackhole etc.. also old cables.xml and new but cannot scan any channels , put in network ID frequency manually and also updates the 1.03 SR4 triple tuner ... running out of options , can anyone please advise if they have a working image on this box ?

thanks

There are a couple of backups which well help but ill be dammed if i can find them at the mo.
 
thanks for trying ...if you find them great if not 2 boxes will be binned and look at new ones :0)
 
cannot find either lol my box collecting dust as useless for me no cable here

cannot remember who it was but someone used a backup of mine made suitable to cable

old but maybe usefull

Please help Dreambox 800 SE Triple tune
 
Last edited:
I have an image here which is none of my own work . ive managed to get it working on my sunray , with bugs i may add , sometimes it comes up tune failed on the channel but does work.

lumpy but works.

i dont have the name of the file as it was downloaded from here and then renamed but pm me and i can always send it to you ?
 
I have an image here which is none of my own work . ive managed to get it working on my sunray , with bugs i may add , sometimes it comes up tune failed on the channel but does work.

lumpy but works.

i dont have the name of the file as it was downloaded from here and then renamed but pm me and i can always send it to you ?

Upload it to this section mate it will help others then

https://www.digitalworldz.co.uk/downloads.php?do=cat&id=3
 
You can get the triple tuner working but you must use satellite.xml instead of cable.xml (I have it working).

this is (partial) in my satellite.xml

"<sat name="cable provider" flags="0" position="1">
<transponder frequency="1436000" symbol_rate="6875000" polarization="0" fec_inner="5" inversion="0" modulation="0" system="0"/>

</sat>

In the tuner setup You have to use this settings ( I have a rotor so I can give the rotor settings):

configuration -advanced
LNB1
auto
user setting
00000
00000
11700
polarisation
No
Band
1.2
none
none
Yes
the rest is normal but I don't used the usals.

With this I can normally scan atellite AND cable :)
 
I couldn't edit my message but you have to change some things

my frequency is in this line 436 MHZ but I had to add a "1" and 3 zero's ,
Also my symbolrate is 6875 but I had to add 3 zero's at the end.

good luck
 
I couldn't edit my message but you have to change some things

my frequency is in this line 436 MHZ but I had to add a "1" and 3 zero's ,
Also my symbolrate is 6875 but I had to add 3 zero's at the end.

good luck

Upload or paste your full satellite.xml mate it will help the original poster
 
hi , ive only just seen this post , now i have tried to upload to the link provided above to no avail , 404 not found

i may sound dumb but where do i upload to ?
 
Back
Top