A8p openpli update no ca found!

St3 · Nov 20, 2014

Hi guys just updated my dm800se with A8p openpli via menu software update and now got a no ca found! Any guids to fix this as all guides are for sim2 no ca found fixes. Thanx.

Ferret · Nov 20, 2014

St3 said:
Hi guys just updated my dm800se with A8p openpli via menu software update and now got a no ca found! Any guids to fix this as all guides are for sim2 no ca found fixes. Thanx.

Same guides apply mate using original bootloaders and images.

Do you have a miniflashup button on the rear of the box ? If so use that to get your IP up for browser flashing.

teracir · Nov 21, 2014

alternatively you will need sunray flashup (search here)
aslo can try dreamup 1.3.3.9 which has worked for me me but you need to have a mini USB cable as well as Ethernet cable connected (between laptop/pc to box)

St3 · Nov 25, 2014

No use my laptop just will not connect via mini usb cable to dm800se

Ferret · Nov 25, 2014

St3 said:
No use my laptop just will not connect via mini usb cable to dm800se

You have to use both miniusb and ethernet or it wont connect so you need a router

Do you have a miniflashup button on the rear of the box if so use that.

St3 · Nov 25, 2014

Yep was connected via both on dreamup and i do have a mini flash button on reciver

Ferret · Nov 25, 2014

St3 said:
Yep was connected via both on dreamup and i do have a mini flash button on reciver

Ok with your Dreambox connected to your router only power down at the plug.

Now press and hold the miniflashup button in keeping it pressed and then apply the power. Do not let go of the miniflashup button till you see a IP on the front screen of your box.

Now use that ip in your broswer to flash a new image. An original image in the case of the A8P sim.

St3 · Nov 25, 2014

Ok will have a go later on, the instructions are clear however just to confirm although it has a8p sim and updated via open pli menu it says no ca found....without using the usb to mini usb cable or dreamup or any other programme: to connect box via network cable and use mini flash button at back instead of normal way flashing via the power button then the usual flashing via browser.

Ferret · Nov 25, 2014

St3 said:
Ok will have a go later on, the instructions are clear however just to confirm although it has a8p sim and updated via open pli menu it says no ca found....without using the usb to mini usb cable or dreamup or any other programme: to connect box via network cable and use mini flash button at back instead of normal way flashing via the power button then the usual flashing via browser.

The miniflashup button basically puts the box in http mode just like using dreamup with 2 cable but a hell of a lot easier.

ebeng · Dec 3, 2014

always remember to NOT update via the console/box

A8p openpli update no ca found!

St3

Inactive User

Ferret

Administrator

teracir

Inactive User

St3

Inactive User

Ferret

Administrator

St3

Inactive User

Ferret

Administrator

St3

Inactive User

Ferret

Administrator

ebeng

Inactive User

Similar threads

We value your privacy