Loading image

When loading an image to my 800 SE I get error crc check skipped with image wrong arcitecture. Any ideas anybody thanks I get this aswell,but the crc check skipped comes in after I pressed the firmware upgrade and put image in browse.


this is the screen I get before the error above. when I have pressed firmware update and load into the browse with the nfi file that when I get the crc check



This is the DM800SE bootloader Web Interface.


If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.

Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...

You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is 7697, and was built on 2010/11/19.

Booloader version: Dreambox Second Stage Loader BUILD #80, built 20101105

device info firmware upgrade

Hi Taffy,

Before going any further, please clarify the following:-

Is the box a clone?
What image did you have when you powered up originally?
What version Sim is it?
What image did you try to flash?
Did the flash progress bar go to 100%?
After the failed flash, what was the error message on the dreambox oled display?
Are you able to get into ***STOP*** mode again (by powering up the dm whilst holding down the dm's power button?
Are you sure it is bootloader #80?