No ca found

panyin

Inactive User
Joined
Apr 6, 2012
Messages
3
Reaction score
0
Please can anyone help me on DM800 HD PVR.
I tried to update the Firmware which I end up getting error message on my box says:
ERROR1 NO CA FOUND.
I tried some forums example but the box is not yet respond.
I used 9-pin cable end to the box and 15-pin cable end to the laptop using Dreamup no com port show up.
And also try USB Serial adapter with HyperTerminal, OptiFlasher v1.0.3 Enigma2 EDition By YASSINOV and Dreamup.
But still the box and laptop are not responding.
 
Thanks for your help, I have try NCF-SIM2-v2.1 still I can found any com on my laptop.
 
Most laptops do not have a serial/COM port - I bet you are trying the monitor port, that doesn't work. You will either need a PC with a serial/COM port or a USB adapter.
 
Thanks, you are right I think win 7 and vista Laptops don't have serial ports.
 
It is not the operating system, but hardware.

Yes, newer machines do not have them. USB to serial adapters are available. Here is one example.Click on this, it is a link Perhaps someone will recommend one which will work straightaway without you having to mess about with drivers and so forth.
 
Please can anyone help me on DM800 HD PVR.
I tried to update the Firmware which I end up getting error message on my box says:
ERROR1 NO CA FOUND.
I tried some forums example but the box is not yet respond.
I used 9-pin cable end to the box and 15-pin cable end to the laptop using Dreamup no com port show up.
And also try USB Serial adapter with HyperTerminal, OptiFlasher v1.0.3 Enigma2 EDition By YASSINOV and Dreamup.
But still the box and laptop are not responding.

1st : You can try to powerUP your dreambox, then start DreamUp and make connection to the box
use the serial connection NO LAN.
2nd : Than put the serial cable in the box, (do not bootUp with the cable inserted)
You wil see that it finds your DreamBox
This works with DREAMBOX Multimedia -> error! AND the no ca found
 
Back
Top