URGENT _ DM800SE Hangs while booting

Kommander

Inactive User
Joined
Sep 1, 2010
Messages
375
Reaction score
40
Location
Next Door
I cant get passed the bootloader on My DM800. It hangs half way accross the LCD display then it crashes. On screen I see the bootloader.jpg and there is a blue light on the right of the front panel. The yellow loading bar on the LCD is at halfway but it goes no further.

Prior to this happening the box had said there were 22 updates available for its extensions so I said "yes" to do the updates at the end it asked to reboot I said "yes" again and it green screened and hung.
I powered off (Hard Reboot) and this loader problem began.
I do not have the flash image the box came with but I have backed up everything on the internal HDD inc the image I think.

I really would appreciate someone advice here, is there a way I can push some buttons to access the backup .nfi file on the hdd?
 
This has happened because you carried out the online automated update. Clones use patched drivers and SSL bootloader. These have most likely been overwritten by the online update and replaced with original Dream Multimedia drivers.
Reflash the image from web browser if boot loader is not damaged. Otherwise you need Mini-USB cable and Sunray Flash-Up and you can restore the bootloader and flash a new image.
Do not do the online updates in images they are updated for original recievers only. Only install updates that downt affect the drivers or SSL bootloader. Standard E2 plugins, skins, softcams etc are fine.
 
This has happened because you carried out the online automated update. Clones use patched drivers and SSL bootloader. These have most likely been overwritten by the online update and replaced with original Dream Multimedia drivers.
Reflash the image from web browser if boot loader is not damaged. Otherwise you need Mini-USB cable and Sunray Flash-Up and you can restore the bootloader and flash a new image.
Do not do the online updates in images they are updated for original recievers only. Only install updates that downt affect the drivers or SSL bootloader. Standard E2 plugins, skins, softcams etc are fine.

I have found that I have access to the box through DCC but the files in the backup dir look too small to be a full backup, the nfi file is 0 bytes and the nf0 is only 127 bytes. However I have just found nfi files in the root of the hdd which are 61,114,127 bytes I take it thats the file I need to use for the restore.

THANKS for the help gsmtech
 
Last edited:
PROBLEM:

Both Sunray Flashup and DreamUP wont start as they report an error saying "Cant Find Any Com Ports"
 
PROBLEM:

Both Sunray Flashup and DreamUP wont start as they report an error saying "Cant Find Any Com Ports"

Did you try flashing it from the web interface?

And as far as I know you need usb drivers for the mini usb cable.
 
PROBLEM:

Both Sunray Flashup and DreamUP wont start as they report an error saying "Cant Find Any Com Ports"

You cant use DreamUP use Sunray FlashUP, I hace PM'd you the link for the USB drivers to use with FlashUP.
 
@gsmtech
feel free to upload files you think of importance to a new thread :) these can be made stickys for all members to have access too :)

a few of us now are getting these boxes and to have the files at hand here would be great, I know ellie will be sorting some out tonight
 
I got my box yesterday , 5 minutes to get running, then made the same mistake as kommader and updated the image.
killed the box but sunray flashup sorted it for me.
I put on the dreamboxuk 1.1 image and it runs smooooth and faaaaast.
Lost for choice with the plugins.
didn't need the usb drivers vista got them for me.
 
A huge THANK YOU gsm, everything is now working again.
The. Com port error was my stupidity I had loaded the SW before plugging the DM in.
I thought this would be a good opportunity to load an openPli image I had downloaded but it didnt work it came up with an error saying nNo CA found, as I didn't have a clue what that was I just flashed my backup and I am up and running again.
Thank you for all the help you've given me your a real really to this forum.

@WIZ
Web interface didn't work, it wouldn't connect. Thanks to you too.
 
Last edited:
I got my box yesterday , 5 minutes to get running, then made the same mistake as kommader and updated the image.
killed the box but sunray flashup sorted it for me.
I put on the dreamboxuk 1.1 image and it runs smooooth and faaaaast.
Lost for choice with the plugins.
didn't need the usb drivers vista got them for me.

It was on your advice I got this box, its great. I just want to load it with the most popular image now.
With the help on DW the move to linux has not been as hard or scatter as I thought it would be .
 
A huge THANK YOU gsm, everything is now working again.
The. Com port error was my stupidity I had loaded the SW before plugging the DM in.
I thought this would be a good opportunity to load an openPli image I had downloaded but it didnt work it came up with an error saying nNo CA found, as I didn't have a clue what that was I just flashed my backup and I am up and running again.
Thank you for all the help you've given me your a real really to this forum.

Good to see your working again. The PLI image gave that error most likely because the image doesnt have the SSL bootloader included.

If you want to try the PLI image again, flash the PLI image via web browser, but do NOT reboot the reciever once the image is flashed, via web browser instead of clicking the reboot button, just browse to the flash page again this time flash the SSL82 nfi file you can find it in the recovery pack link I posted in downloads. Then reboot the reciever PLI image should now boot.
 
I think this box is going to get very popular very quickly :)
 
Can one of the mods or admins please edit the title of this post to make it say DM800SE instead of DE?
Bloody predictive text...


Done (Rat)
 
Last edited by a moderator:
Well everything is running now apart from one thing, when I try to get extensions no matter what way I go into the extensions manager it goes to update the catalog but comes back blank.

Any Ideas?
 
Well everything is running now apart from one thing, when I try to get extensions no matter what way I go into the extensions manager it goes to update the catalog but comes back blank.

Any Ideas?

Are you trying to get plugins?
If so install TS Panel its much easier m8
 

Attachments

  • enigma2-plugin-tspanel_2.6_mipsel.rar
    366.2 KB · Views: 4
@wiz569 Just installed the tspanel as suggested above but how do i now find it & use it?? DM800HD Pro with black hole image.

cheers

Steve.......

Well on my dm800se its menu-plugins or press the green button :)

Sent from my ZTE-BLADE using Tapatalk
 
Back
Top