DM 7020-Si

bluearrow

Inactive User
Joined
Dec 25, 2011
Messages
4
Reaction score
0
Hello. I'v been using Pli image and Dark motor inteligent for 2 years without a problem. I used Dreamup for another image, I add the Longtitude and the Latitude : The motor has got stuck.
Manually turn the dish on Astra 19 then ask DM to go to 0 and this happend . After I asked to Recalculate and happend (I beleave).
But when I ask to go to 28.2 or other sat it doesn't move.
I would also like to say that on the display of the darkmotor I see a red dot flashing 10 times then a green and red line. After that the sat trying to move BUT is not happening and goes on again and again (red dot flashing 10 times then a green and red line).

Can somebody please helpme?
Thank you in advance
Harry.
 
Hello. I'v been using Pli image and Dark motor inteligent for 2 years without a problem. I used Dreamup for another image, I add the Longtitude and the Latitude : The motor has got stuck.
Manually turn the dish on Astra 19 then ask DM to go to 0 and this happend . After I asked to Recalculate and happend (I beleave).
But when I ask to go to 28.2 or other sat it doesn't move.
I would also like to say that on the display of the darkmotor I see a red dot flashing 10 times then a green and red line. After that the sat trying to move BUT is not happening and goes on again and again (red dot flashing 10 times then a green and red line).

Can somebody please helpme?
Thank you in advance
Harry.

can you not reset the motor on the ladder? press east/west buttons together for 10 seconds to reset... after that unplug the f-con to the stb for a couple of mins to cut all power then try again,regards mdt
 
Back
Top