Pli with oscam & cccam installed E1 DM500

Thank you soooooooo much. I have been struggling for days trying to get Oscam and CCcam onto PLi. I tried putting the Tar.gz file in tmp, that didn´t work. tried manually putting the files in the relevant directories, but couldn´t turn on softcam. Thanks again, was on the point of going insane.


How do I update PLi (to latest image) without wiping Oscam and CCcam?
 
Last edited:
I presume this is the entire image mate, flash to the box using dreamup etc, I managed to get this working but having Oscam and the cardserv and CCcam and the EMU has it so cccam always seems to start 1st, so I have to stop it restart oscam then launch cccam again, does this image do this? or anyone know of a way round it?
 
Hi Monkeyman,

No I have put this backup on my machine (using DCC and Telnet). I was just wondering how in the future I could update to a newer PLi open image, yet still retain the Oscam and CCcam that is on this image. (PLi seems to update its image every day!)

If you are having problems with Pick Tv, I was with Darkstar, I had to retsrt the Cam 3 times to get Pick to work, but this works perfectly.
 
Last edited:
fes_786. Slight duplication. in VAR/BIN you have two CCcam bin files (which one do I delete) and in VAR/SCRIPT there are also two CCcam scripts (again which one can I delete). It works fine as it is, just nice to free up some space.
 
Thank you soooooooo much. I have been struggling for days trying to get Oscam and CCcam onto PLi. I tried putting the Tar.gz file in tmp, that didn´t work. tried manually putting the files in the relevant directories, but couldn´t turn on softcam. Thanks again, was on the point of going insane.


How do I update PLi (to latest image) without wiping Oscam and CCcam?

as far as I am aware you can not get oscam installed without a manual method - see attached document for installing oscam on a PLi image on a DM500
 

Attachments

  • MANUAL INSTALL OF OSCAM ON PLI JADE 3 ENIGMA 1 IMAGE.pdf
    41.3 KB · Views: 933
No you just use the file fes-786 uploaded and put that on your Dreambox (similar to restoring Dreambox). You end up with a nice new PLi image, all tuned in to Astra 2, bouquets set up and CCcam and Oscam. Nice!
 
I presume this is the entire image mate, flash to the box using dreamup etc, I managed to get this working but having Oscam and the cardserv and CCcam and the EMU has it so cccam always seems to start 1st, so I have to stop it restart oscam then launch cccam again, does this image do this? or anyone know of a way round it?
Hi, i made this back up that fes_786 has uploaded, have you adjusted the configs at all because oscam should be starting first.

Hi Monkeyman,

No I have put this backup on my machine (using DCC and Telnet). I was just wondering how in the future I could update to a newer PLi open image, yet still retain the Oscam and CCcam that is on this image. (PLi seems to update its image every day!)

If you are having problems with Pick Tv, I was with Darkstar, I had to retsrt the Cam 3 times to get Pick to work, but this works perfectly.

I am doing another backup now with latest versions of open pli & oscam this time i have mapped the popular channels epg also to store 2 days data in tmp, still a couple of things i am not happy about but i will upload soon.
 
the reason cccam will b starting first is because the date on ur box is wrong
oscam looks for the date and if its set before that oscam version came out then it waits about 30/60 sec for the date to update or it starts

by that time cccam has taken over card reader

easiest thing to do is instead of reboot box u restart enigma

or if u know how this is the command via telnet which updates date and time via internet:

/sbin/rdate -s time.mit.edu

so if u could make a script were it runs before any emu is loaded then u laughing
 
the reason cccam will b starting first is because the date on ur box is wrong
oscam looks for the date and if its set before that oscam version came out then it waits about 30/60 sec for the date to update or it starts

by that time cccam has taken over card reader

easiest thing to do is instead of reboot box u restart enigma

or if u know how this is the command via telnet which updates date and time via internet:

/sbin/rdate -s time.mit.edu

so if u could make a script were it runs before any emu is loaded then u laughing

This has been overcome by restarting both cams 30 seconds after boot with oscam restarting 15 seconds earlier, new backup has been thoroughly tested and there are no problems.
 
Here is a new version
Open pli of 14/8/11
OSCAM 1.10rc-svn build #5921 & CCcam 2.13 Preinstalled with 0963 Configs
Radio Times EPG Is Ready Mapped !


Ready to Run, Just Insert Your Card !

No need to enter boxkey as oscam will detect your card automatically.

Card speed automatically clocked to 5mhz

Image Contains UK bouquets & will store 2 days worth of epg data, the following bouquets are already mapped for you.

Sports,movies,entertainment,lifestyle, documentary, music, kids

NOTE: 30 seconds after boot both cams are restarted with oscam starting first, this is to eliminate any problems with oscam not finding card reader.

Installation

Install Via Flashwizard pro (attached )
1. Download Image & exract to desktop.
2. Download & start Flashwizard pro
3. Fill in DM configuration Then simply drag image file Into programme as shown below
4. Enjoy, image will be flashed in under 2 minuetes

flashwizard.png


image

Multiupload.com - upload your files to multiple file hosting sites!

flashwizard

Multiupload.com - upload your files to multiple file hosting sites!
 
the reason cccam will b starting first is because the date on ur box is wrong
oscam looks for the date and if its set before that oscam version came out then it waits about 30/60 sec for the date to update or it starts

by that time cccam has taken over card reader

easiest thing to do is instead of reboot box u restart enigma

or if u know how this is the command via telnet which updates date and time via internet:

/sbin/rdate -s time.mit.edu

so if u could make a script were it runs before any emu is loaded then u laughing

Ive just used js940's latest backup - its on a dm500c though, so no sat feed to get time, the manual time adjust wont let you change the date past 1974 :-( only way i could get oscam to be card reader was to as fes_786 said and telnet /sbin/rdate -s time.mit.edu

Anyone help me out with making a script how how to get this running before the emu?

any help gratefully appreciated

Yosser
 
I managed to flash this image today as per instructions above and although I see ccc@m in default softcam and osc@m as card server, prick tv will not clear for me, any ideas anyone?
 
I managed to flash this image today as per instructions above and although I see ccc@m in default softcam and osc@m as card server, prick tv will not clear for me, any ideas anyone?

what you flashing to a dm500c or dm500s?

if its a dm500c in my personal experience i had to telnet:
/sbin/rdate -s time.mit.edu
to the box then i rebooted via menu and it picked oscam up as the reader
 
Hi,

Trying to install this using flashwizard and it keeps hanging when writing cramfs, can someone creat a backup.img so i can use dreamup?

Thanks
 
Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup

Here is another UK Ready backup for dm500 Users, one or two reported problems with Oscam not starting first on the last backup so this is for you.



Loaded with SGTFlipFlop bouquets of 14/9/11

CCcam info installed

No need to enter your boxkey, Oscam will read it from your card




Oscam Web info is installed, to view & check your entitlements
In your web browser type

Code:
You don't have permission to view the code content. Log in or register now.

E.G 192.168.0.9

Username & password = admin

Click Readers



Then view entitlements



**********************This image is configured to update your entitlements automatically ************************


Install by Dreamup or Flashwizard pro, both formats attached below.
Use whichever you prefer.

Enjoy

Dreamup Version

Flash Wizard Version
 
Re: Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup

but if u using a dm500 as a standalone server without sat feed will this update time via internet before starting cams???

if not then its just fancy version of what i posted above lol
 
Re: Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup

but if u using a dm500 as a standalone server without sat feed will this update time via internet before starting cams???

if not then its just fancy version of what i posted above lol

Answer is No, i'v tested it
 
Re: Gemini 4.70 Oscam & CCcam 2.13 UK Ready Backup

Hi JS940,

Should the epg just dl automatically or do I have to do it manually as mine doesnt seem to work?

Thanks
 
Back
Top