Help with cs setting up wampserver also need help with my subbed channels

Hi, ive been away from the cs /ccam scene for a few years now and decided to go back to it so I have a DM 500s with the S@y card ,I have opened a port on my router so the port forwarding part is fine and I have an no ip address, I put the card in the dm and I cant unscramble the movie channels but I have put in the box key and pin number but the channels are still not clearing apart from the discovery and kids channels. I used to share via the box not on a massive scale but I used to install wampserver and edit the php files etc. but now I cant seem to get the correct version keeps saying corrupt and fails to open, so was wondering if anyone could help me out ,I 've tried on various forums which I was a member of for a few years but I've had no replies as yet ,as far as I know I have installed the correct box key and pin number in the ccam config I used the windows calculator. there's not much point in sharing if I cant accsess the premium channels I don't know if i've missed something out on the ccam config it is as follows

SERVER LISTEN PORT : 12000
#Switch on/off access to info
#Default is yes
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
BOXKEY: /dev/sci0 16 @f 1@ A@
PIN: /dev/sci0 8823
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

any help is much appreciated and I will return the favour if I can as I'm willing to do my part in helping others

Is your card paired to a HD box,might have taken the update which disables sharing of premium channels.

wiz569 said:

Is your card paired to a HD box,might have taken the update which disables sharing of premium channels.

Click to expand...

It was in the sky hd box last Sunday when I got it installed m8 it's been a while since I shared so Im a bit rusty, that must be the cause of it I thought it was just the wrong box key I had installed I put the serial number in the windows calculator as decimal then hit the hex key to get the 8 digit box key number

henrikno71 said:

It was in the sky hd box last Sunday when I got it installed m8 it's been a while since I shared so Im a bit rusty, that must be the cause of it I thought it was just the wrong box key I had installed I put the serial number in the windows calculator as decimal then hit the hex key to get the 8 digit box key number

Click to expand...

That will be the cause so m8,you are out of luck unless you can get it paired to an SD box

thanks for the reply m8 its appreciated am I right in saying the serial number is in the actual boxes settings above the viewing card number it starts with 0 and ends in D so its like 01234562789D as when I put it in the windows calculator I cant put in the first 0 just the numbers 123456789 then hit the hex key just double checking ,well there goes the cs at the first hurdle . In regards to the sd box what type of box would that be have a spiderbox but that's HD so I don't think it would be that and an openbox but I don't think you can enter boxkeys on the openbox either.
I do have an old sky box just says sky digibox at the right hand corner has 2 slots one for the viewing card and the one above says interactive card one dish input and scart to connect the tv its a pace model

It would have to be a SD Sky box m8,not sure if the Pace box will work,the info is on here somewhere m8

Thanks m8 I'll have a look tried the pace box and nothing changed surprised the thing powered up lol

henrikno71 said:

Thanks m8 I'll have a look tried the pace box and nothing changed surprised the thing powered up lol

Click to expand...

You would need to ring them up and ask them to pair it to the Pace box m8,think of a good excuse,it wont do it itself

Lol would have to be a good excuse considering I just got it installed 2 weeks ago today, probably end up with an engineers visit and a big bill for there visit