[DOWNLOAD] Red Light Fix - VU+ Solo V3 Box

Ferret

Administrator
Staff member
Administrator
Joined
Apr 13, 2007
Messages
16,056
Reaction score
12,642
Location
Yorkshire Born & Bred Leeds !
Downloads: A new file has been added by Ferret:

Red Led Fix - VU+ Solo V3 Box

1) Use small rs232 board connected to receiver and use rs232 cable connected to computer.

2) Power on the box

3a) Do Flash folder (update 1kb file)

Then

3b) Run UpdateAllFlash.exe on PC and choose the correct com port

4) Open "solo boot.bin"

5) Click update, it will show progress, wait it to finish.

6) Remove small rs232 board and cable

7) Power off, and power on again, box will finally start/boot, now you can use usb, update the image you want with USB Stick


Attachments
 
Last edited by a moderator:
Downloads: A new file has been added by Ferret:

Red Led Fix - VU+ Solo V3 Box

1) Use small rs232 board connected to receiver and use rs232 cable connected to computer.

2) Power on the box

3a) Do Flash folder (update 1kb file)

Then

3b) Run UpdateAllFlash.exe on PC and choose the correct com port

4) Open "solo boot.bin"

5) Click update, it will show progress, wait it to finish.

6) Remove small rs232 board and cable

7) Power off, and power on again, box will finally start/boot, now you can use usb, update the image you want with USB Stick


Attachments


i can't download a link :(
 
Last edited by a moderator:
i can't download a link :(

You need to contribute 5 value adding posts before you download privileges are applied. There is a 24hr period from your 5th post to been able to download to check your posts are not just thanks or spam type posts.
 
I can't see link either, hoping to get a v2 ferrari solo fixed, its stuck on a red light?
 
Thanks Joe, but is this ok for version 2 Ferrari, just the title says V3, does it matter?
 
Every step of this process seemed to go well, using laptop with proper serial port, got the little serial adaptor, proper null serial cable, tested.

Followed each step to a tee and each went as it should, flashed bootloader then my usual vix 023 v2 appolo image, also tried and tested.

Slight good news that no more red light, the box boots green but nothing on screen, have tried both hdmi and scart and av connections but nothing...
 
Every step of this process seemed to go well, using laptop with proper serial port, got the little serial adaptor, proper null serial cable, tested.

Followed each step to a tee and each went as it should, flashed bootloader then my usual vix 023 v2 appolo image, also tried and tested.

Slight good news that no more red light, the box boots green but nothing on screen, have tried both hdmi and scart and av connections but nothing...

Strange one that mate id usually feel this was due to a image been flashed for the wrong version security chip but you have that image tested.

As you done this procedure maybe try other chip version images.
 
Back
Top