help plz, lot of channels not showing and trying to flash new image

wakkaday

Inactive User
Joined
Dec 25, 2005
Messages
96
Reaction score
0
i was messing around with the dbox (bad mistakes) and now alot of the channels are not showing, they just bring up a black screen....i have tried re upload service.bouqet files, but its still the same...
i have noticed there is a lock sign on the channels which are not showing...i dont know if i can unlock these and how ? (i have not put any parental control lock on)

additionally i want to now upgrade to commando 4.0 ( i am on the older version) but nothings happening...

i am using image flash assistant and when i power on dbox it just starts as normal, the 'flashing' sign dint come up after a long while, and when it did...i accidently turned it off....now i can't get it to reflash...

can anyone advise
 
Does the box still power up fully? If so, I would always recommend you ftp the image file to the /tmp folder and flash using the remote and onscreen menus...far easier than trying to get IFA to work.

IFA will not work if you have any antivirus running or any firewalls enabled (including windows XP firewall).
If the box will not boot up fully, the only option is to use IFA. You will need to shutdown all antivirus software and disable all firewalls. Run through all the options in IFA and when you press the last OK and the box minimised to the left hand side, plug the box in it should say FLASHING on the LCD. If it does't and it hangs up again, hold the UP ARROW and the POWER button together on the front of the box and it will reset, hopefully it will say flashing this time. If not, unplug the box, wait a few seconds and plug back in. If it still doesn't work, you might have something wrong with your network setup.

This thread might also healp you.

http://www.digitalworldz.co.uk/forums/93887-power_cut_while_flashing.html#post659636
 
wicked i did what you said and its now working, thanks so much appreciate it.
 
Back
Top