ppcboot.mot for Dbox2 -> debug using hyperterminal

Hi all,
I'm new on this forum.
I'm looking for file ppcboot.mot.
I need it because I want put in debug one Dbox2 Nokia 2xintel by Hyperterminal and using null modem cable only.
I found info about in this post

https://www.digitalworldz.co.uk/index.php?threads/96673/

But when I'm trying send file ppcboot.txt .... my computer non stop "beep" in speeker, an there are man "bushes" on the screen. I think that this is not right file.

Best regards
DJ

Man Bushes.....lol.

Is your LAN socket on the Dbox2 broken?

Perhaps, Lan is broken (I'm not sure, because there is no communication between PC and Dbox2 - IP on PC 192.168.5.3 mask 255.255.255.0 and in BootManager Dbox IP 192.168.5.5)

I have an u-boot.mot file (this file for flashing by using nullmodem only) and this file is transmitted ok. After chorus 800000 u-boot is running correctly. And one more -> when u-boot is running, after command flinfo .... Bank #1 INTEL 28F320C3T, but in Bank #2 missing or unknown FLASH type. Is it OK, if I have Nokia 2xIntel box ?

ppcboot.mot is very important in this moment for me to be sure, that box is ok, or mayby flash in bank #2 is dead ..

Thanks.

think this what you are after

Thanks for file, but I have this file already. Ppcboot.mot and this file inside archive above is this the same file?
And this problem still present.
My second flash is broken?

Thanks.

If its a Bmon 1.0 box
Use a ethernet crossover cable as well as your nullmodem cable and follow this tut

Thanks for reply, but still nothing.
I have got the second one Nokia 2xintel and there is no problem with communication in BootManager.
I think, there are two possibilities:
1. broken lan,
2. broken one flash intel chip.

Have anybody got dumps for external programming chips in programmer?

Ps. I found one thing on board: in the place, where is pin12 - no connection between point 12 and 12 pin of Intel flash. After connect, there is nothin on display...

Thank you.

didzej said:

Thanks for reply, but still nothing.
I have got the second one Nokia 2xintel and there is no problem with communication in BootManager.
Thank you.

Click to expand...

I dont understand what you mean by the above?
When you plug the ethernet cable in with the box on do you get a connection message in your systray with the two monitors?

Post a screenshot of dboxmanager when it gets to as far as it goes please

Did you get it to flash "reset" repeatedly in the lcd?

What does it say in the lcd when you turn the box on?

In this moment there is nothing on LCD.
When one connection circuit was broken (between 12th pin of flash and point 12th of reset) on LCD was "premiere".
I fix this connection and after that nothing on LCD.
No "flashreset" on LCD, because Bootmanager not communicating with dbox.
As I said - I have second dbox2 and there is no problem with communication.
I have got programmer for intel flashes, but haven't got dumps for flashes....

Thanks for all replays.

Problem solved.
I programmed both flashes by Uniwersal Flash Programmer.
Box works, but ehernet port is broken. But in this moment there is no problem.
Thanks for all suggestions.

Regards