Flashing Problem - While erasing blocks 0x006e0000-0x00700000 on /dev/mtd/4: Input/ou

SmellyJocks

Inactive User
Joined
Sep 25, 2006
Messages
144
Reaction score
0
*debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID Hallenberg.com dbox2 Linux Umbau Service Neutrino d-box d-box2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

Size: 8192 kB in 71 Sectors

Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


dbox2 - ImageFlashingAssistent

- Hallenberg.com -



While erasing blocks 0x006e0000-0x00700000 on /dev/mtd/4: Input/output error

You can turn off the dbox now.


Please press Enter to activate this console.
------ Extra Informations ------
Selected Network adapter: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.0.1
IP-Adress of the Dbox: 192.168.0.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Duron(tm) Processor @ 800 MHz
Filename of the Images: commando 6.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.1
------ Powered by Hallenberg.com dbox2 Linux Umbau Service Neutrino d-box d-box2 ------
 
Back
Top