Cloud IBox 2 SE+ stuck on boot screen

jfish

VIP Member
VIP Member
Joined
Sep 21, 2007
Messages
3,203
Reaction score
699
was working fine since I set it up yesterday, unplugged power to take box to another room, plugged it back in and all I get is the word boot on the display on the box and on the TV the words IBox Cloud

How can I bring the box back to life, has the image got corrutped.
 
was working fine since I set it up yesterday, unplugged power to take box to another room, plugged it back in and all I get is the word boot on the display on the box and on the TV the words IBox Cloud

How can I bring the box back to life, has the image got corrutped.

Just needs re flashing mate.
 
Id go with a 2gb for flashing, kingston has always worked for me
 
smallest Argos do is 8GB Scandisk ones .. so will have to buy that tomorrow and hopefully can get the box back to life
 
Will be more than enough i find the cloud ibox range is picky with the USB sticks it will use.

As it happens i use a Kingston stick for flashing it 32gb but even a 1 gig stick is more than enough.
 
all sorted now, did a low level format of the USB flash pen then a full format and voila box flashed image

Install OpenATV v4.2 but discovered have to install softcam manually now
 
Jfish if it gets stuck on boot again . try flashing it with the image you have on box and wait till you see U-rf on the display then remove the power and take usb out and restart box , then it should start normally and you wont lose anything you have saved on box your line plugins ect , this also works on the ordinary Plus models , hope this helps in the future.

Mick
 
Jfish if it gets stuck on boot again . try flashing it with the image you have on box and wait till you see U-rf on the display then remove the power and take usb out and restart box , then it should start normally and you wont lose anything you have saved on box your line plugins ect , this also works on the ordinary Plus models , hope this helps in the future.

Mick

When I did manage to flash it last night, got no display on the display on front of box so wasnt even sure when it was done. I waited 30 mins then restarted box and OpenATv started loading
 
When I did manage to flash it last night, got no display on the display on front of box so wasnt even sure when it was done. I waited 30 mins then restarted box and OpenATv started loading

Yes thats happened a few times with me also ,the boxes seem tempremental sometimes lol

Mick
 
I had previously had my ibox 2 plus on upstairs with Vix Zeus Cloud Ibox II Plus Edition By Ferret on it working fine.

after not using it for a while mine was also stuck on the boot screen
i reflashed the same image and it came up done
i powered off, removed usb then powered on

i saw the vix image load up like normal the lcd read Lc-c i think

the lcd changed to '''' and then to . . . . the screen is now off too.

whats going wrong here?

thanks
 
Hi there,

I did a stupid thing and updated my box OTA.
After the update It stuck on boot logo and now its not working.
I tried everything, tried to flash it several times with different images without luck.
I took it to the service, they tried Jtag,changed the flash etc but still nothing.

It is permanently dameged or I can still save it?

Thanks.
 
Hi there,

I did a stupid thing and updated my box OTA.
After the update It stuck on boot logo and now its not working.
I tried everything, tried to flash it several times with different images without luck.
I took it to the service, they tried Jtag,changed the flash etc but still nothing.

It is permanently dameged or I can still save it?

Thanks.

ANyone pls?
 
You dont give enough specifics !

What errors messages if any were seen in bb3 when jtagging.

It was only stuck on the bootlogo so didnt even need jtagging. Does it get to the bootlogo state now or not ?

I cant jtagg as i dont have the tools.
Can you please share a link where can I obtain the necessary tools for jtag?
Is it worth buying ones?
 
I cant jtagg as i dont have the tools.
Can you please share a link where can I obtain the necessary tools for jtag?
Is it worth buying ones?

You said you took it to service and they tried to jtag it so why didnt they succeed did they say ?

If it was just stuck on a bootlogo it didnt need to be jtag by your service people.

Does it still display a bootlogo or nothing?
 
You said you took it to service and they tried to jtag it so why didnt they succeed did they say ?

If it was just stuck on a bootlogo it didnt need to be jtag by your service people.

Does it still display a bootlogo or nothing?

He somehow fixed my box and now is working fine.
He said that he used 2 flashes as my box was a clone of a clone.
Unbelieveable.

Anyway, thx for your help.
 
Cloud ibox 2 plus is freezing a lot thought it might be my internet then plug in my open box n its fine is it just matter reflashing new image or is the cloud ibox one of the cheaper basic boxes cheers fr any help
 
Cloud ibox 2 plus is freezing a lot thought it might be my internet then plug in my open box n its fine is it just matter reflashing new image or is the cloud ibox one of the cheaper basic boxes cheers fr any help

Freezing as in picture freeze via CS ?

If so it could be how you have your cam setup but you dont say what cam your using
 
Back
Top