Peugeot 206 -

hi guys
i brought a s-reg 206 1.1 for the mrs ... gave it a quick service 2day filters oil etc... noticed a tearing noise coming from the cluch when the car is ticking over but goes when you press the pedal in......
am i rite in thinking it's the thrust bearing/relise bearing?

anyone ever done one?
d.i.y or garage?


thx guys

yes bearing gone,not good to drive car car as more damage may be done,unless you have access to a load of tools i would say garage job

cheers fella
wht tools would i need i have a large tool box lol

jack and axle stands,better if you have a hoist the one with button for up and down:banana:13mm socket and ring spanner,oil drainer to drain oil and to refill gearbox again,8mm allen sockets for gearbox,also maybe15,16,17.and 18mm sockets and spanners,you will also need 2 jacks one for supporting engine and one for gearbox and watch your head when gearbox falls on it as its heavy and solidroud:

If you are doing the release bearing, it's best to replace the clutch also. While you are in there and all that


Sent from my iPhone using fingers and thumbs!

[ame=http://www.youtube.com/watch?v=Ppg_70IM_qQ&feature=fvwrel]YouTube - Replacing A Clutch In Your Vehicle.[/ame]
[ame=http://www.youtube.com/watch?v=wsTKhg21WU0]YouTube - How to remove and replace a peugot 206 clutch.[/ame]

if ya dont realy no what ya doing just bang it in a garage
but make sure its some 1 recomended becouse it has been known just to replace the prob then a few months down the line the clutch might start slipping

always replace as a 3 piece kit,unless you have an unlucky car that has a duel mass flywheel also:lol:

thx for ur help guys 7hours and it's all sorted.....

why did you put clutch plate in backwards lol,well done

cactikid said:

why did you put clutch plate in backwards lol,well done

Click to expand...

haha no just took me time made sure all went back how it came apart only had 1 bolt over oooooops