[DOWNLOAD] vag com12.10.3 vcds 12.10.3 vag12.10.3

Mick

Administrator
Staff member
Administrator
Joined
Jan 19, 1999
Messages
32,153
Reaction score
9,217
Downloads: A new file has been added by Mick:

vag com12.10.3 vcds 12.10.3 vag12.10.3



vag com12.10.3 vcds 12.10.3 vag12.10.3


2013 Vag12.10.3 Version VCDS VAGCOM 12.10.3 VCDS12.10.3 OBD Diagnostic Software
New Feature:

1.Includes partial support for VW Crafter vans. Communications with all control modules;

functions supported: Control Module ID and Advanced ID, Fault Codes(Read and Clear),

Supported Codes, Security Access, and Adaptation. Other functions such as Measuring Values,

Output Tests, and Basic Settings will be added in future versions.

2.New, more universal Airbag Coding Assistant.

3.New "Upload Debug/Log File" function in Applications Dialog

4.Completely revised and expanded ROD (ODX) Data.

5.New USB Drivers. Now compatible with the latest PCs which use Fresco Logic USB3

chipsets.

6.Refactored DTC routines which interpret DTC data, including enhanced interpretation of status

byte for DTCs in UDS modules.

7.New area to display additional info for Basic Settings.

8.Added data types 0B, 0D, 0F to Generic OBD-II Mode 9.

9.New version of LCode. Thanks to Niels in Denmark!.

10.Revised and expanded Label Files. Thanks to Sebastian!

11.Many other small fixes and improvements, as well as everything which was introduced in

Beta Versions 11.2 - 12.10.3.


PC Requirements:

A computer running Microsoft Windows. A Laptop, Netbook or Tablet Computer is best, but a

desktop PC can also be used.

VAG COM12.10.3 diagnostic software works with Windows 2000, XP, Vista,and both 32-bit and 64-bit).




*While Digitalworldz is a well respected site please note that this file has not been tested and must be tested before use, digitalworldz will not be held responsible for any damage caused by members not testing (for viruses etc) out the files correctly beforehand!

NOTE: This file is a link to an external source, and not a direct download from Digitalworldz... site may be down or file removed please be aware!
 
Last edited:
Didnt have much luck with this on Win7 machine , have a good ELM347 Cable and the ports we all fine , but on testing kept giving error interface not found ? anyone have any ideas ?
 
Hy. I have made by mistake an update to my vag 118 interface . Can i undo it to its original state to work with vdcs 11.3 ?
Help me please
 
I assume it's a clone cable as a Ross Tech one would have no issues with the update, you may have to contact the person/seller you got the lead from for instructions to re-program the cable, sorry it's not what you want to hear but there is inbuilt security in the VCDS software to knock out the clones
 
I assume it's a clone cable as a Ross Tech one would have no issues with the update, you may have to contact the person/seller you got the lead from for instructions to re-program the cable, sorry it's not what you want to hear but there is inbuilt security in the VCDS software to knock out the clones

i think it's a clone....Thank you for your help
 
Didnt have much luck with this on Win7 machine , have a good ELM347 Cable and the ports we all fine , but on testing kept giving error interface not found ? anyone have any ideas ?

Was it plugged into the vehicle? Car does not need to be on but you will need to have 12v going to the cable through OBD side to validate a cable.

Generally for VCDS you will need to have a genuine Ross-Tech cable unless you have a cracked version or have the license file and use a script to batch replace the files as VCDS will refresh/recheck for a genuine license. Not sure on the refresh timing. Search for the serial version 409.1 S and use a serial to usb KKL cable. You can use most functions with serial version dependent on model year.
 
I have a genuine HEX+CAN usb lead from Ross tech works fine of course with Windows 7 / 8 /8.1 flawless.
ebay stuff and non genuine are limited in what you can do earlier software was ok .I built a lead which worked fine on my B5 model
 
sorted the download thanks plugged into car and when go to test get this error any ideas please

- - - Updated - - -

vag image.jpg here is the error
 
anyone help on this please other than that i will have to pay the garage which i dont wanna do if you get me drift lol
 
You must be using a counterfeit Ross Tech cable, you will have to purchase a genuine cable to use the latest VAG com software or get in touch with the person you purchased your cable from and ask for another software option
 
U can buy 12.12 and cable from aliexpress for $15

Sent from my GT90H-A33 using Tapatalk
 
Back
Top