Vauxhall VDO CDR 2005 Code

Hi,

I have a VDO CDR 2005 cd player in my Vauxhall asking for code after replacing battery.
Serial Number is: GM020521254169

I really appreciate your help in advance,

Thanks

hoss6800 said:

Hi,

I have a VDO CDR 2005 cd player in my Vauxhall asking for code after replacing battery.
Serial Number is: GM020521254169

I really appreciate your help in advance,

Thanks

Click to expand...

do you have the precode
security code
the last 4 digits from the barcode sticker of your radio usually 1 letter and 3 numbers

This is all I can see;
VDO
330886630
No.: 24441224
Type: cdr2005 (e)
UY8
there are to barcodes further down
9922...0925500 (... can't read)
00302121254169

V/A 000212

hoss6800 said:

This is all I can see;
VDO
330886630
No.: 24441224
Type: cdr2005 (e)
UY8
there are to barcodes further down
9922...0925500 (... can't read)
00302121254169

V/A 000212

Click to expand...

at the end of the barcode
the last 4 digits need to be 1 letter and 3 numbers

No mate,

Can't see any other number on the unit. This is all can see
I searched around and apparently the only way is to read 24C16 eeprom and get code from it, which require a eeprom reader

Thanks for your help anyway

been having a read my self
and as u say read eprom or only way is access to the database

Are they SMT EEPROMs? Getting them out and back is a little more tricky then if they were DIP.

I'm sure someone would have an old ELVIS multiprogrammer which I think reads them. Might be wrong, its been a while.

found this elsewhere:

'no code for this one from the serial,if its a delco unit you need to read the tms370.'

'Search licznik 4.8, and serial interface read it code.'

'ok basically you cannot get the code for this radio by the serial number so without equipment to do this job you'll need to bring it to your local decoder or possibly try talking nice to the nearest dealer.
hope this helps.'

Apparently its a 24C16 SMT.
My question is, Do i need to remove it in order to read it, or can I solder wire to the pins and read it without removing

encrypted data in eeprom mate you can read it but you wont get the code out of it, you need to rewrite the eeprom with a new dump with the code known, i can get you one tomorow if you need dump and yes mate eeprom off to write.

place in birmingham will do it for a tenner

only other option is pay vauxhall for a new pass code with your radio code

can be read by upa or xprog carprog ect from pins on the rear
but the eqipment is expensive so ide say get carpass and look there ?

I made a simple Eeprom reader ( cost me about £3.50 to buy the componenets and half and hour to make). Then read the 24c16 and got the code from dump.

Thanks

hoss6800 said:

I made a simple Eeprom reader ( cost me about £3.50 to buy the componenets and half and hour to make). Then read the 24c16 and got the code from dump.

Thanks

Click to expand...

Nice .

Not encrypted then?

It was, I had to use another program to read Dump and get code

Hi,

I have a SIEMENS CDR 2005 (E) UY8 cd player in my Opel Agila, asking for code after replacing battery.
Serial Number is: 24469304
I really appreciate your help in advance,

Thanks

Hi I have a CDR2005(E) GM020532855437 I disconnected the battery now I don't know the radio code can you help me please

Albi1 said:

Hi I have a CDR2005(E) GM020532855437 I disconnected the battery now I don't know the radio code can you help me please

Click to expand...

generally code is only available from EEPROM dump file but to read EEPROM is a bit of a specialists job

i have a cdr 2005e i need the code serial number is gm020543350212. any help please thanks

stevehaines said:

i have a cdr 2005e i need the code serial number is gm020543350212. any help please thanks

Click to expand...

code from serial will probably only be available from dealership or paid service websites...see answer to post 18