[DOWNLOAD] Panasonic PBX Unified Maintenance Console UPCMCv7.8.1.1_R17

I need to program with the US version of the console. I"m glad I found this forum.
 
I have the following issue when connecting to the PBX console: UB2000B: The maintenance console software cannot connect to the pbx because of the software that van maintain the KX-NCP500/1000 version is not installed to this pc...

Is the software with multi region support?
 
I just picked up a TDE-200 from an auction. Once I get to 5 posts, I will use this to try and administer the thing! I haven't been able to find the software anywhere else.
 
I hoped that the uploader and the site admins would find my praise to be meaningful! Oh well. Neither this nor my previous post need count against my 5.
 
I hoped that the uploader and the site admins would find my praise to be meaningful! Oh well. Neither this nor my previous post need count against my 5.
your a paid member you should be able to dl once account sorted
 
Hello!
As I understood this software covers support for Panasonic PBX "KX-TDA15".
Anyone knows how many expansion cards it can support?
We have one (and only) in our office (office consisting of 8 desks with digital lines for talk and analogue for faxes) and we need to add more extensions to it for new officers.
 
I am trying to get the Maintenance Console for the Panasonic KX-TDE100 to work but seem to be having issues.

What is the correct version?

I had downloaded UPCMCV7.8.11 R14 but during the install it asked me for a suffix which I was unable to locate. Were would I find the suffix?

I tried selecting "C" as the suffix, since I noticed the interface cards ended in C. The application installed but when I try to access the maintenance console, I get a error saying the program was not installed correctly. Is this due to the region or suffix question in the install phase?

I have uninstalled the R14 software of the Maintenance console and have now installed UPCMCv7.8.1.1_R17 but it also is asking for a suffix.
The web interface appears to work as it is giving me the extensions and the date/time info but no info as to the co lines, etc.

I have also downloaded UPCMCv7.8.2.0_US_R1 and gave it a try. It appears to be a USA version but the Maintenance console portion comes back as no application installed. The web interface appears to work but it is limited as only providing extension names again. This is frustrating.
Will the USA version claimed to be listed here actually work?

Can no one help me with the USA version of this software? How many posts must I make here? Is this another bait and switch website? Let me guess, you decide to pay and they send you a download of the same crap available all over the web.
 
I had the same problem. Using a KX-TDA50 with no suffix. Flipped the unit over, and no suffix in the model number listed on the little sticker either.
 
I am getting an error E000012 The program is not installed correctly when trying to connect to a TDA200 US version.
 
I am trying to get the Maintenance Console for the Panasonic KX-TDE100 to work but seem to be having issues.

What is the correct version?

I had downloaded UPCMCV7.8.11 R14 but during the install it asked me for a suffix which I was unable to locate. Were would I find the suffix?

I tried selecting "C" as the suffix, since I noticed the interface cards ended in C. The application installed but when I try to access the maintenance console, I get a error saying the program was not installed correctly. Is this due to the region or suffix question in the install phase?

I have uninstalled the R14 software of the Maintenance console and have now installed UPCMCv7.8.1.1_R17 but it also is asking for a suffix.
The web interface appears to work as it is giving me the extensions and the date/time info but no info as to the co lines, etc.

I have also downloaded UPCMCv7.8.2.0_US_R1 and gave it a try. It appears to be a USA version but the Maintenance console portion comes back as no application installed. The web interface appears to work but it is limited as only providing extension names again. This is frustrating.
Will the USA version claimed to be listed here actually work?

Can no one help me with the USA version of this software? How many posts must I make here? Is this another bait and switch website? Let me guess, you decide to pay and they send you a download of the same crap available all over the web.
Did you get it figured out?
 
The USA Version of the Maintenance console does not ask for suffix codes during installation. USA systems there for i believe do not have suffix codes, atleast for the ones i have remotely supported. @ riggs429, the suffix is on a white sticker at the bottom or back of the cabinet. You may see something like KX-TDE100BX, KX-TDE100CN, KX-TDE100NE etc depending on your locaion. The lastest version of the console (Both USA and Global version ) is 7.8.2.0 as far as i know.
 
So I'm new here and found this while trying to get software for a couple of TDA50G systems I need to install for customers. I have installed a dozen or so of Panasonic systems from back in the white box days, and now a couple of the customers are interested in upgrading from their 12 year old boxes while keeping the phones they already own. I had 3rd party software to program 616 and 1224 systems, but I am looking for the actual Panasonic software. From my reading in this thread it appears the R17 may not support the 50 series. Is that correct? I have found a listing on Amazon for $195 with screen shots that list the 50 as one of the system options. Any help would be appreciated.
 
Where can I find the US version for Panasonic KX-TDA50 console programming?
 
So I'm new here and found this while trying to get software for a couple of TDA50G systems I need to install for customers. I have installed a dozen or so of Panasonic systems from back in the white box days, and now a couple of the customers are interested in upgrading from their 12 year old boxes while keeping the phones they already own. I had 3rd party software to program 616 and 1224 systems, but I am looking for the actual Panasonic software. From my reading in this thread it appears the R17 may not support the 50 series. Is that correct? I have found a listing on Amazon for $195 with screen shots that list the 50 as one of the system options. Any help would be appreciated.
I'm in the same boat here. There doesn't seem to be current experts following this anymore. I did find one company that would supply software and drivers for the 50G if I bought it from them. They then quoted me $567 for a base 50G which I can get most everywhere else for $375 to $450.
 
I'm new to the forum and I have been trying to find the download button but couldn't.
 
I'm new to Panasonic, can someone please help me on how to configure the PRI30 on KX-TDA100
 
Does V7.8.2.1R1 US version Unified Maintenance Console work on Windows server 2016 over IP? It keeps saying "Unable to connect". Turning off the firewall doesn't help. I didn't try anything else.

It connects (over network) fine on VMWare Windows7 x32 and x64. I haven't try USB since Win2016 is also a VM.

My KX-TDA200 is still on V2.014 (I don't if upgrading the firmware is possible).
 
Back
Top