VU+ Duo Need setup help please ?

weekendrush

Inactive User
Joined
Aug 11, 2013
Messages
15
Reaction score
0
Hello everyone. I'm new to this so hoping somebody could help me out ? Ive got a Vu + Duo and I'm trying to add new image and get everything working. I know how to install/flash the new image onto box. Ive put a recent black hole image on which has auto bouquets. I have copy and pasted my service to config/etc/CCam and run auto bouquets but the box is just sitting on the blue load up screen and I'm getting 0% snr on most channels, all dish and leads are inserted correctly.

Is it something to do with CCcam I'm not sure ? Do I have to activate it or download it ?

Hope someone can help, driving me up the wall !!
 
I have a fixed dish on 28.2E with 2 outputs from dish into box. Have tuner config as A, single 28e and B equal to A
 
Yes you need to download cccam install it and start it are you geting freeview

Sent from my Xolo_X900 using Tapatalk 2
 
Thanks for the replies guys. I will try both of them suggestions tomorrow and let you know how I get on. Cas I'm not even getting freeview so I guess I have to download CCcam. Could anybody point me where to download and what folder to put it into etc ? Cheers
 
you don't need cccam to get freeview go on dishpointer website that will help you with your dish that's it what needs sorting first
 
If your not geting freeview there's a problem with tuner set up or your channel listing go to go bouquet and then all(red) and see if you have freeview channels clearing

Sent from my Xolo_X900 using Tapatalk 2
 
to make sure your dish is pointed at 28.2e correctly do a automatic channel scan, and you will be able to see all the channels pop up as the box finds them. if nothing pops up then its either a wiring issue or your dish isnt looking at 28.2e
 
Thanks for all replies. I know it's not a problem with dish or wiring as my old image was working fine but was crashing quite a bit. Trouble is that image was all pre loaded when I purchased box so this is my first time adding a new image myself. I have added the image quite easily but it's getting it working which is the problem. I will try the scan when I get home from work and try looking at CCcam to see if it needs activating or downloading. Do most new images have CCcam on already and just need activating ?
 
No you will need to download cccam from here then ftp your line to cccam.cfg then start cccam first u need to know if everything else is set up correct what channel list do you use

Sent from my Xolo_X900 using Tapatalk 2
 
The image has auto bouquets, do I still need a channel list ? Also can you tell me how to add CCcam, ie do I need to extract file and FTP to box ? It's the CCcam bit what is I can't get head around. Thanks Cas
 
Cccam is a softcam and yes you will need to download that to your pc/laptop unzip the ipk and ftp ipk to temp then install the ipk throgh install local extention I would also download rats bouquet ipk ull get everything u need here on this site

Sent from my Xolo_X900 using Tapatalk 2
 
Thanks for all your help guys. Everything is up and running and working perfectly :)
Is there an easy way to save all settings and image on a memory stick ?
 
Back
Top