[TUT] How to upgrade JTAG to newest dash 2.0.12611.0

[janobi]

First you need to get on the newest Kinect Dash. To do that use Easy freeboot 0.4. I have used it and it works extremely easily.

Download:

You don't have permission to view the code content. Log in or register now.

1. Open EFB
2. Check needed option(s)
Donor Files - I have not tested so Use at own risk
Aud_Clamp Fix. Also known as Alt SMC- if this is done on your box
you must check this.
If incorrectly checked/unchecked your box will not
boot
3. Select your Nand image
I used original unsure if XBR/freeboot will work
4. Enter your Cpu key
5. Verify motherboard revision
6. Allow dos Prompt to finish and save your New nand


Now you need to get this on your Xbox

1. Make sure new nand is named updflash.bin
2. Place on usb drive and insert into Xbox
3. Boot Xbox using eject key to start Xellous
4. Xbox will auto update and prompt to power cycle when done
5. Unplug xbox for 10 seconds and then plug in and try to boot


Assuming all previous steps have completed properly move on to getting avatar/ Kinect support.

1. Download 12611 update
Download:
Code:

You don't have permission to view the code content. Log in or register now.

2. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.

Finally Install DashLaunch 2.03

1. Download:
Code:

You don't have permission to view the code content. Log in or register now.

2. Copy Installer Folder onto Xbox HDD either through USB or FTP
3. Run default.xex from FSD file-browser
4. Follow on screen Prompts.
All credits for this tutorial go to belenos

 

[AK__47]

Just to say for some reason I couldn't use (update) using Xellous, had my flash drive formated in FAT and FAT32 and I made sure the file was called updflash.bin but no luck.

Anyways I finally remembered the tool called Flash360 and I used it to flash the updflash.bin and it worked

Here is the link incase if someone else has my probolem.

You don't have permission to view the code content. Log in or register now.

Now I am running on 2.0.12611.0 with all Avatar/Kinect and DashLaunch working

Thanks

 

[kh4tri]

do i have to rejtag my machine for this to work.
sorry am a complete noob to this

is something of flashing involved, or is everything usb flash drive based

 

[maddogs]

I have been trying this but my original nand files are corrupted and have made a backup of xbr nand and it gives an error unable to find sysupdate.xexp1

 

[maddogs]

I was on 8955 dash had to update to 9199 and then 12611 to get it to work but all ok now.

 

[Midnight Tboy]

Can't do this until get my jtag fixed

For xellous to update, for me at least in the past, you have to pull out the power of the 360 for a few minutes/seconds.....otherwise it wouldnt boot the update from the usb stick.

 

[Plastron]

Hi,

I already have the new Dash 2.0.12611.0 installed so if i download the update as below and run it. This will not over write the jtag but just update the kinect and avata's sorry if stupid question but new to this.

Andy


1. Download 12611 update
Download:
Code:


Code:
MEGAUPLOAD - The leading online storage and file delivery service
Multiupload.com - upload your files to multiple file hosting sites!. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.

Finally Install DashLaunch 2.03

 

[AK__47]

Hi,

I already have the new Dash 2.0.12611.0 installed so if i download the update as below and run it. This will not over write the jtag but just update the kinect and avata's sorry if stupid question but new to this.

Andy


1. Download 12611 update
Download:
Code:


Code:
MEGAUPLOAD - The leading online storage and file delivery service
Multiupload.com - upload your files to multiple file hosting sites!. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.

Finally Install DashLaunch 2.03

Hi Andy and Welcome to DW.

Yes, as long as you are on Freeboot 12611 you be fine.

Also my advice would be to remove or bridge the R6T3 resistor to stop any update over writing your jtag setup!

Have a look at these picture if you want to do this:

You don't have permission to view the code content. Log in or register now.

 

[Plastron]

Hi
Thanks i have free boot installed how do i tell which version it is i assume as my Dashboard show12611 i should be ok

 

[AK__47]

Hi
Thanks i have free boot installed how do i tell which version it is i assume as my Dashboard show12611 i should be ok

Yes, you be on freeboot 12611 if your dash is 12611.

 

[Plastron]

Thanks for the help and advice have run the up date and all is working fine

 

[AK__47]

Thanks for the help and advice have run the up date and all is working fine

No worries, enjoy your stay at DW