Thor 6 at 0.8°W

Hi again all,

If you are using Phantompatch 133p on your TM 5402 HD CI+ Super+

Download the channels from the following transponder/frequency on...

Thor 6 at 0.8°W

12.303 V [27500] 5/6 DVB-S2 [8PSK] 68.2 Mbps [K2 Europe Beam]

Then have a look at the first seven (7) channels on the bouquet... and see what happens...

Best Wishes,
Zorch

Hi Zorch

Just to confirm what you may be thinking, yes the first (7 ) channels just goes to blank grey screen.
Then after that SCRAMBLED CHANNEL.

DEN

Hi owen,

The reason I posted is because the first 7 channels are partially opening... I know there is no picture or sound... and I also don't know for sure if the receiver is partially opening them or whether it's a fault on the transponder... maybe the patch makers/coders have been trying something with this transponder/channels... who knows...

I'm getting several different things happening on the first 7 channels... some go to a grey screen as you describe... but 2 or 3 of the channels have been displaying black & white horizontal bars... however I haven't received the 'Scrambled Channel' message on any of the channels once they have 'opened'...

It's a strange one...

Best Wishes,
Zorch

Hello Zorch,

Using the m2 version of TM 5402 with 107p.

Same results on sd channels no scrambled banner shows on that frequency.

Sometimes black and white bars on others grey verging on green.It is a strange one?

All the best. jamsb.

I only just noticed the encryption type too. Very interesting find Zorch....

and some interesting reading : PowerVu - Wikipedia, the free encyclopedia