help with a tm600

joshua99

Inactive User
Joined
Sep 3, 2013
Messages
6
Reaction score
0
Hi, I've just been given a tm 600 & i'm trying to set it up just as a receiver at the moment but i'm struggling with just about everything, I've been trying to read up on it but all the posts are quite old. At the moment I've factory reset it & just put 39east on & scanned it & got quite a few channels, the fta ones work ok but I can not get diemma to open it just comes up scrambled. The reading I've done tells me that the softcams are loaded by pressing the red button, which I've done, but it still does not open. One of my questions is has the support for this finished? is there an up to date softcam for the 600? & if there is can I load it with usb? My other boxes are spiders & they are very easy to set up. Finally is there a complete set up guide for the 600? I thank you all very much for any help & advice given. I'm running with a motorised dish on usals all sats between 30W & 42E & the box shows firmware of 13/12/12:Dunce::Dunce::Dunce:
 
Hi again, would it be possible for one of you wonderful, knowledgeable, kind & most helpful people to either explain or point me in the right direction how to enter soft keys to a tm600 via ftp. I have searched & searched but cannot find anything about it, & not haveing enough posts can't view all the files. Thank you in advance to any of you wonderful, wonderful people who reply. I am at my wits end at the moment as I can't find anything I'm looking for (tbh I do not know what I'm looking for.) :Dunce:
 
ok mate your box is the same as every other dreambox 500s, so by looking for guides on the dreambox 500s it will give you a lot of knowledge. You also need to do a couple more things to get bulsat on 39e to open and there are only a few channels that you will get to open as they changed most of the encryptions last year I think. Check lyngsat for what channels are still available, your looking for the ones in irdeto 2. When you go into the softcam menu you need mgcamd1.38 or mgcamd1.35a. Then you need to get a set of dreambox keys with the correct sofcam.cfg file within it that have the correct keys. These files need to be sent to the box via a program like dreambox controle centre or dcc and send then to var/keys and var/scce. Restart the cam via the blue button I think and if you have got everything correct the package will open. There maybe an option of the remote to download the latest keys but I'm not sure.
 
Thanks for the reply but i'm still struggling like hell, when i go into the softkey menu (blue button + password) the default softcam is mgcam1.35a, the diemma key is default & the bulsat key is default, when i click on the default softcam (mgcam) i get message saying softcam keys can't be edited at this time. I've tried the mini web can't see anything in there, the tcc 7.1 can't see anything in there I just can't see anywhere where the keys would go. The keys are supposed to be able to update via the red button, when i press it messags pops up saying updating softcam keys but diemma (39e) still stays scrambled, i asked on another forum & was told i had to update via ftp (so i suppose the support for red button updating is finished) but i can't find anything about this ftp or where it is. Thank you very much again for the reply & if you could exlain some more i would be very grateful. :Dunce::Dunce::Dunce:
 
Back
Top