Working 100% : CCcam+Gbox with SSSP on Technomate 1000/5000/6000 Series

wolftje

DW Regular +
Joined
Dec 12, 2008
Messages
1,098
Reaction score
385
Location
Belgium, The land of waffles ! Really ?
Admin, I started this new Thread coz the other was about HADU-SSSP.

Thanx to sakiblateef for pointing me into the right direction !
In fact he should get credit for this :) > preparing a Manual with pics

I Have a 100% running config with SSSP on a TM5000Ci+ USB
Gbox and CCcam together !!!

100% Running & Tested So far :
Tv vlaanderen 19,2E - 23,5E
Nederland Digitaal 19,2E - 23,5E
Digital+ (ES) 19,2E
French Lover Hotbiord 13E
Theme X 13E
Sky Uk 28E, 95%, maybe a sharing thing

Not working
SCT 13E
Sky Deutschland 19,2E



You need the software HDVB : taken from this site originally : http:// sisnagra DOT webcindario DOT com/hdvb DOT html


configure COM port, MODE SSSP
Speed : 115000
Delay Tx : 1000
AutoAdjust On
Open ComPort to activate SSSP(this you better do after you have started Gbox and/or CCcam connections)

Settings that worked Good for me in CCcam.cfg
[CCcam]

Wantemus=1
Active=1

MaxHop=3


#CCcam Servers syntax #
C: CCcamserver.dyndns.org port Login Pass 0


Have Fun :)
W0lftje
 
Last edited:
To add to the above tutorial.


1. Edit cccam.cfg in HDVB folder with your sever details. Once you've done that you need to make sure you add a 1 at the end else the software won't recognise your sever.


cccamcfg.jpg



2. Load HDVB and set the correct config setting as shown below by clicking on the config button on the right.


hdvb.jpg


comport.jpg



3. Next click on open comport make sure the receiver is on standby before doing so. Once you've pressed the open comport button you can go the channels you want to clear.


hdvb2.jpg



4. Thats all there is to it. Click on cccam tab to view your sever details etc if you want to.


hdvb3.jpg



Note: it can take up to 5 seconds between channel change for it to open the channel also this software should work on Gbox as well but I've not tested it.


Enjoy. :thumbsup:
 
what do i do to the 6900 to get it to work
is has go the server but does not clear channel
thanks
joe




To add to the above tutorial.


1. Edit cccam.cfg in HDVB folder with your sever details. Once you've done that you need to make sure you add a 1 at the end else the software won't recognise your sever.


cccamcfg.jpg



2. Load HDVB and set the correct config setting as shown below by clicking on the config button on the right.


hdvb.jpg


comport.jpg



3. Next click on open comport make sure the receiver is on standby before doing so. Once you've pressed the open comport button you can go the channels you want to clear.


hdvb2.jpg



4. Thats all there is to it. Click on cccam tab to view your sever details etc if you want to.


hdvb3.jpg



Note: it can take up to 5 seconds between channel change for it to open the channel also this software should work on Gbox as well but I've not tested it.


Enjoy. :thumbsup:
 
what do i do to the 6900 to get it to work
is has go the server but does not clear channel
thanks
joe

On the cccam tab under status on the far right does it say connectados? If it doesn't then it might be your server. Also what model are you using is it normal or super?
 
hi
itsays connectados
i am using tm6900 not super
the server is my own on a dm500
so how do i confirm that the 6900 is connected?
thanks#
joe
 
my local in cccam on dm500 is dorcel
but does not open on the tm6900 not super
if i use cccaminfophp the client is in the lst
so what can i check to find fault?
thanks
joe
:proud:
ps can you call me on msn live
mine is [email protected]



hi
itsays connectados
i am using tm6900 not super
the server is my own on a dm500
so how do i confirm that the 6900 is connected?
thanks#
joe
 
Last edited:
YOU NEED TO GIVE MORE FEEDBACK;
LIKE WE DO.... screenshots, detail description..
3 sentences, "it does not work" is not enough to give decent support....

You need a patched TM6900 (Non super)
You need a good working CCcam server, you dreambox
You need to make a new account on your cccam server (Reshare)
All the info is in our Posting text and the Pics posted.

A basic knowledge of CCcam and Gbox and also the use of the nulmodemcable is needed.

Read it carefully.... ! Then telle what you did and what went wrong

W'll get this sorted out for you. :)
 
Last edited:
how is it connected??
i'm guessing either a serial or null modem cable to pc/laptop.
or something else??
 
how is it connected??
i'm guessing either a serial or null modem cable to pc/laptop.
or something else??

You can connect your receiver to a null modem cable and stick the other end into a usb to r232 cable and use it on your laptop.

This is the setup I used for the test.
 
my local in cccam on dm500 is dorcel
but does not open on the tm6900 not super
if i use cccaminfophp the client is in the lst
so what can i check to find fault?
thanks
joe
:proud:
ps can you call me on msn live
mine is [email protected]

wolftje has pretty much explained what you need to do.
 
and so i take it, the latop/pc has to be ON when watching the 'other' channels?
 
ok and thanks.
only asked cos a mate has got a 1500 and been tempted to try but dont know how to set up and use.
 
Hi lads, i can't open HDVB prog it's coming up with !!
component' mswinsck.ock' or one of its dependencies not correctly registered: file is missing or invalid

and do need to be connected to net with pc when connected to TM?
 
hey guys, this seems like some awesome stuff, sorry im a noob and mainly used the technomate 1500ci+ with darkmans patch to watch saturday football 3pm kick offs. but for a long time have not done so.

anyway more to the point, with the card sharing utility, if i configure everything ok, can i get sky uk working?

thanks in advance
paimai

p.s my bad i just read the sticky post regarding card sharing which says it works on 6800/6900 models at the top of this forum, does that mean my techno 1500ci+ will not work? im confused as this thread says the 1000 series
 
Last edited:
Hi lads, i can't open HDVB prog it's coming up with !!
component' mswinsck.ock' or one of its dependencies not correctly registered: file is missing or invalid

and do need to be connected to net with pc when connected to TM?

unpack this into the folder with the file youre trying to run m8, if it still dont work, copy it to c:/windows/system folder instead
 
hey guys, this seems like some awesome stuff, sorry im a noob and mainly used the technomate 1500ci+ with darkmans patch to watch saturday football 3pm kick offs. but for a long time have not done so.

anyway more to the point, with the card sharing utility, if i configure everything ok, can i get sky uk working?

thanks in advance
paimai

p.s my bad i just read the sticky post regarding card sharing which says it works on 6800/6900 models at the top of this forum, does that mean my techno 1500ci+ will not work? im confused as this thread says the 1000 series

the 1000 and 5000 series also have some form of SSSP enabled on them as well m8
 
Digidud! m8 it's still coming up with same massege i have tryed in system folder and folder on destop
 
I am getting massege on my pc & other laptop !!component' mswinsck32.ock' or one of its dependencies not correctly registered: file is missing or invalid
 
Back
Top