tm600 power supply

davido

Inactive User
Joined
Jan 1, 2010
Messages
141
Reaction score
3
needed if anyone knows where to source one or has one laying around...
put a 500 power supply in and it works fine but doesnt have the hard drive leads on it...
 
just had an email from technomate stating the power supply is £25 and £13 for delivery. No caps are bulging. could anyone point me in right direction to fix it.
 
replace all the caps if theres not any that are visibly blown, should get them from ebay for a few quid, or maplins etc
 
Re: Tm600 gone dead



hi capacitors ref no c22 c23 both 1000uf 10v upgrade these capcitor with 1000uf 16v i hope this should restore your box to normal working condition best wishes
 
there are 4 10v 1000uf caps on this board. Do i ugrade all of them? the position numbers are different too. No. 213-214-215-216
 
there is no harm you can change them i changed 2 capcitors 9 months ago and my box is still working
 
bought all of the capacitors today but only changed the 4x 10v 1000uF ones. now back up and running. not sure which one was at fault or if it was only one. thanks to all for replies.
 
now ive got power supply working plugged into sat dish and getting no signal... one thing after another i suppose... any suggestions what this could be...?
 
maybe a short not feeding power to lmb ?

nope it all works fine on dreambox... did a scan today and found about 70 channels thats all.... and they work ok... but doesnt find channels on all freq...
 
really ment a short in the box not dish
if there is a short at power supply then the lmb might not be getting enuf juice to power it right
 
update: changed the tip42 and still no joy... going in dustbin now...
 
Sell it on as faulty describing the faults you have. Someone else may need parts off it.
 
Back
Top