Tm500 super and mini-web

brof

Inactive User
Joined
Oct 8, 2011
Messages
8
Reaction score
0
Hi all, Just setup a TM500 super with ur 11-3-11 which i believe is the latest, everything fine so far and iv done a bit of reading here on the subject of the receiver, Q i have is when connecting to the receiver through router its not bringing up the mini-web, like its supposed to, but is bring up another page? its not the mini web, what am i doing wrong? please forgive my limited know how here.

Also when i flashed through the router cccam 2.2.01 is installed as default, the cads reader will read conax, viaccess, even a sly card but not irdeto, i would of thought that that softcam would read the irdeto card.

best regards to all
 
Power of your box at back, hold down power button on front of box, power back on the box. after a couple of secs you will see 3 digits on the front of your box, that is the last 3 digits of your box ip, i.e 192.168.0.101 then 101 will be on the box. Now use your browser asain to connect and that should get you miniweb.
 
Power of your box at back, hold down power button on front of box, power back on the box. after a couple of secs you will see 3 digits on the front of your box, that is the last 3 digits of your box ip, i.e 192.168.0.101 then 101 will be on the box. Now use your browser asain to connect and that should get you miniweb.

Thanks for the reply, yes thats grand but theres a little more to it than that, On another tread is the same type of post where the poster is asked to check the dhcp of the router, but in my case i dont get to the miniweb interface,
 
Is DHCP on in your router and is dhcp ticked in the box lan settings
 
Thanks for the reply, yes thats grand but theres a little more to it than that, On another tread is the same type of post where the poster is asked to check the dhcp of the router, but in my case i dont get to the miniweb interface,

But you will get to the miniweb if you follow cuebase's advice,
or are you saying you have already done that and you still cannot get into the miniweb interface?

if the latter, when you enter the ip address into your web browser and once the page has finished loading just press Ctrl+F5 and the miniweb should load then
 
But you will get to the miniweb if you follow cuebase's advice,
or are you saying you have already done that and you still cannot get into the miniweb interface?

if the latter, when you enter the ip address into your web browser and once the page has finished loading just press Ctrl+F5 and the miniweb should load then

Il try when i get home, will let u know,
Thanks
 
Irdeto :
If the card is a 'White' G*mm* smartcard it won't work. tm linux box can't read that. a dm800hd(se) or higher can do and dm500/dm7020 with a duolabs/phoenix cas2/3 programmer/reader.
 
Il try when i get home, will let u know,
Thanks

Well its working now, for some strange reason it wouldnt let me in until now, anyway its progress :proud:
 
Irdeto :
If the card is a 'White' G*mm* smartcard it won't work. tm linux box can't read that. a dm800hd(se) or higher can do and dm500/dm7020 with a duolabs/phoenix cas2/3 programmer/reader.

Hi, no its not its a official aljaz card? I would of thought cccam 2.2.01 would read it no probs? strange
 
But you will get to the miniweb if you follow cuebase's advice,
or are you saying you have already done that and you still cannot get into the miniweb interface?

if the latter, when you enter the ip address into your web browser and once the page has finished loading just press Ctrl+F5 and the miniweb should load then

I have the same problem with my box every time when i am going to put the ip address into the web browser it take me to the Enigma web Interface where i can't change anything . i am really interested in mini web interface where i can change my cc-line. i have followed the same procedure which you were telling to "Prof" but i am still unsuccessful to get the mini web interface window
 
I have the same problem with my box every time when i am going to put the ip address into the web browser it take me to the Enigma web Interface where i can't change anything . i am really interested in mini web interface where i can change my cc-line. i have followed the same procedure which you were telling to "Prof" but i am still unsuccessful to get the mini web interface window

turn the receiver off at the rear, press and hold the power button on the front of the receiver and turn the power back on, wait for a number to appear in the display. enter this number on the end of an ip address like this

192.168.1.number

and youll then see the miniweb interface
 
turn the receiver off at the rear, press and hold the power button on the front of the receiver and turn the power back on, wait for a number to appear in the display. enter this number on the end of an ip address like this

192.168.1.number

and youll then see the miniweb interface

Thanks for the quick reply. i have done the procedure so many time but still web interface window is coming instead of mini web interface window.i am really struggling to get it right . For your information i am using "IQ Team" image on my technomate 500 box. Any comments will be much appreciated in this regard.
Alishah.
 
Last edited:
Did you try Ctrl+F5 when the web interface shows after doing the above?

Other then that try a different image
 
Did you try Ctrl+F5 when the web interface shows after doing the above?

Other then that try a different image

I did Ctrl+F5 but still i am unsuccessful. Do you have any idea which image is best for technomate 500 SUPER to get the mini web interface. Any input will be much appreciated.
Regard,
Alishah
 
When I used mine any of the TM images had it, never used IQ though sorry

Sent from my X10i using Tapatalk
 
if you are getting the web interface, then you are letting the receiver boot instead of setting it into miniweb mode

you have to press and hold the power button on the front of the receiver before turning on the power, and keep it held in untill a number appears in the display
 
helo alishah999,Once you have got the numbers up on the box you have to leave it like that while you go into your mini web page other wise you will just go into web interface,I made this mistake the first time i ever tried to use mini web but since then have never had a problem even working on two boxs at the same time,have a good day all.
 
Last edited:
helo alishah999,Once you have got the numbers up on the box you have to leave it like that while you go into your mini web page other wise you will just go into web interface,I made this mistake the first time i ever tried to use mini web but since then have never had a problem even working on two boxs at the same time,have a good day all.

Thanks all of you for your nice help. i am really thankful to you mates. Now i got the mini web interface. I actually pay to one of the cardsharing site to get all channels with reasonable amount here is the e-mail which i have received from their side for the initial setup of my TM-500 super box.

""""""2""""""" TM500 super with installed enigma + emulator mgcamd 1.35 support without any problems. As first prepare your box, install emulator Mgcamd, copy files from attached archive to the folder /var/keys/ .
After you need just need purchase subscribtion in billing (newcamd protocol) , and copy generated CWS line from billing to the file /var/keys/newcamd.list 1 hour after purchasing, you can restart emulator and watch. Anser on your questions you can find here
Moderator""""""""""""""""""""""""""""""""

Here i am really confused because they send me a file called "newcamd.rar" and telling me that you should put this into the folder/var/keys. but i cant see anything in the mini web interface where i should put the whole .rar file or unzap form of it. Any input on my problem will be much appreciated.
Regards,
 
Last edited by a moderator:
Here i am really confused because they send me a file called "newcamd.rar" and telling me that you should put this into the folder/var/keys. but i cant see anything in the mini web interface where i should put the whole .rar file or unzap form of it. Any input on my problem will be much appreciated.
Regards,

It needs to be unrared and ftp'ed to var/keys m8,you cant do that from mini-web as far as I know
 
Back
Top