Bad Sound and Picture on Cccam / cline

MKDons73

Inactive User
Joined
Feb 25, 2010
Messages
178
Reaction score
12
Location
Milton Keynes
I have a cline with a provider and i'm having so many problems with the TM600 with sound cutting out / picture breaking up cccam version is 2.1.3 i have tried all from 2.0.8 upwards and its still the same . I have asked my provider and he has no experiance with the TM boxes so a little help would be good :)

He mentioned what codec my system had installed ,not sure if you can install codecs on TM600 can we ? or how do i find out if there is one installed.

I can't even ping my provider to see what latency i'm getting or even tracert it to see if its his server
 
Last edited:
has it ever worked well from that share ? could just be bad ping, overloaded etc.

shouldn't be anything to do with codecs etc.

press "bookmark" on remote and see what ECM says
 
Last edited:
it is more than likely the provider not the box if rebooting the box and router makes no difference then that would be my answer as it could be a bad or overloaded server.
when i first went down cs route i took out a month sub that was really bad in evenings and on sport days but perfect in the mornings . i moaned and got told it was my technomate as servers were built for dreamboxes as no other box could decrypt the ecms quick enough. bollox i thought had a test with another provider and haven,t looked back get the occasional glitch in evenings and odd reboot but you have to accept those .
i would try and get a trial with another provider before you throw the box out of the window
 
I'm thinking that too , its always been bad , i had a Spiderbox HD9000 before and sold that due to the c/s problems now i have this box and its the same come to think of it the providers server must be the issue . I'll try and find a UK based one anyone can point me in the direction of a good stable provider i'll give thanks :) .



I won't throw the box out of the window as i have only just started on the linux side and i'm lovin it . just need to get my DM500S working as i broke that lol
 
the linux technomate receivers (software wise) are identical to dreamboxes, they run the same softwares and the same cams, so it sounds like a server issue to me
 
I'm thinking that too , its always been bad , i had a Spiderbox HD9000 before and sold that due to the c/s problems now i have this box and its the same come to think of it the providers server must be the issue . I'll try and find a UK based one anyone can point me in the direction of a good stable provider i'll give thanks :) .



I won't throw the box out of the window as i have only just started on the linux side and i'm lovin it . just need to get my DM500S working as i broke that lol

just sent you a pm mate hope it helps
 
As mentioned above mate, try the "Bookmark" button and see what Hop and ECM is!!

I believe the lower these both are the better it is for you!!

I'm a newbie too and had similar issues, but now I have a perfect line turned out that the supply I was getting was very bad!!
 
Just had a quick look and the ECM data is CCam-s2s , hops 2 , ecm time 0.197

Is this bad or ok
 
Having said that it is a good ecm time for a hop 2,
but only time will tell if it stays stable,especially if there is sport on and lots of people on the same share.
 
Its not stable now mate , even at this time of the day , once evening hits its unwatchable with hop2, i have a test cline with hop1 and its rock solid . so i'm still on the hunt for a good server . might put my card out there to get something back (hope that was allowed)

mark
 
I have a tring card , not sure how to set it all up thou as i only have one box untill i jtag my DM500 then i'll be putting it in there .
 
I have a tring card , not sure how to set it all up thou as i only have one box untill i jtag my DM500 then i'll be putting it in there .

A tring card isn't that great to offer up for a share. Sent you a PM.
 
Back
Top