How do I get into the cccam info page?

You need to install and configure cccaminfo.php on your PC.
 
you could try this.
in your webbrowser type "your box ip number":16001 and this should get you to your info pages
 
On the PC? Can get it ok on the box itself but want to access it on PC

You have to enter the following lines into your CCcam.cfg file and save it:

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : xxxxxxx
WEBINFO PASSWORD : xxxxxxx

Enter username and password of your choice.

In your pc searchbar then type box ip followed by port 16001 eg http://192.168.1.67:16001
This should present you with your login box

If you foward port 16001 in your router to 'CCcam info' you could then access it by typing http://yourbox.dns.org:16001
This would also ensure your external dns addy is working properly and allowing your peers access as per other query.
 
You have to enter the following lines into your CCcam.cfg file and save it:

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : xxxxxxx
WEBINFO PASSWORD : xxxxxxx

Enter username and password of your choice.

In your pc searchbar then type box ip followed by port 16001 eg http://192.168.1.67:16001
This should present you with your login box

If you foward port 16001 in your router to 'CCcam info' you could then access it by typing http://yourbox.dns.org:16001
This would also ensure your external dns addy is working properly and allowing your peers access as per other query.


That works. I enter 192.168.1.67:16001 and it brings it up so I guess that means forwarding etc is working ok
 
That works. I enter 192.168.1.67:16001 and it brings it up so I guess that means forwarding etc is working ok

Entering you box ip will only check local commection to CCcam, it will not confirm port forwarding and dns addy are working.
For that you will have to type your dns addy instead of the box IP

e.g. - http://mybox.homelinux.org:16001

If you get into CCcam info then all is good with the DNS.org and port forwarding works.
 
Entering you box ip will only check local commection to CCcam, it will not confirm port forwarding and dns addy are working.
For that you will have to type your dns addy instead of the box IP

e.g. - http://mybox.homelinux.org:16001

If you get into CCcam info then all is good with the DNS.org and port forwarding works.

Na, It doesn't do anything, and if I enter my dyndns addy I end up at router homepage, Grrr getting pissed off with this.

Is this not forwarded correctly?

routerk.png


portg.png
 
Last edited:
Na, It doesn't do anything, and if I enter my dyndns addy I end up at router homepage, Grrr getting pissed off with this.

Is this not forwarded correctly?

routerk.png


portg.png

Have you forwarded port 16001 to your box?
 
You need to forward port 16001 to CCcam info and port 12000 to CCcam. You should then give the port 12000 out in your C lines to your clients i.e :

C: yourbox.dyndns.tv 12000 username password no

In your other thread here, your C line example to your clients had 26000 in it which would only work if you had forwarded port 26000 to CCcam.
 
old thread but having exactly the same problem cccam info works fine with internal ip:16001 but not dns:16001 i know my ports are open as i have checked them and my server is online i know its only a minor thing but nevertheless annoying anyone got any ideas?
 
Back
Top