skybox f3 cline input

dacostm7

Inactive User
Joined
Dec 28, 2012
Messages
4
Reaction score
0
hi there, I need help with my skybox f3...A two days ago I got a 3 months sub for uk channel but after I had input the cline on my cccam conf still says offline/log in but if i put the same code on cccam conf but on newcamd list its says is online but does nothing in terms of clearing/openning the channels...
can help on this matter
thanks
 
ends with 14....the guy who gave the codes told me this is a mgcam code, after that i went to input the code on the mgcam setting but I still have no channels, he told me to wait for a least 3 days for the channels to be clear, i don't know if its the right amount of wait or if there is cases where u input the code on mgcam and clears up the channels straight way.
 
3 days? It should clear in 3 seconds if the server is active mate!

One thing to remember with the open boxes is once you've typed your details in, hit save, pressed green or whatever it is to enable your line you have to reboot the box.
 
you can also enter these via a PC/laptop by inserting a usb stick in the F3 and downloading the newcamd.list file from the cam menu then editing the details on your PC? just remember to replace the N: with this CWS = . You can then upload back to F3 and activate the cam
 
before anything, thanks for your help people....I when I did input the mgcam codes on the box and reboot the box nothing did happen(this on the very first time inserting the codes)...but one question I have is if once you put the mgcam codes in the f3 box there is any option in the buttons to active the server because once I insert my codes there isn't any option to active while on cccam codes menu there is a option to active once you insert the code...

I will try and do the PC/laptop way to see if helps in anyways...my code includes already CWS =
but I don't if I will have the active button option as a mention earlier
 
from...menu...network settings hit 6666 on remote...it should open the secert menu where u enter the cccam or mgcamd line...pm me the line if you want and ill send you the cccam and mgcamd file that you load onto the usb stick to load either cam...

ps ..ill check your line to see if it works on my duo....promise i wont do anything else with it..

see here below instructions:

CLINE SETUP
1: Go back to main menu
2: Select Network..press 6666 on remote to get to hidden menu..
3: Select "CCcam Client Setup"
4: If you have a cccam.cfg on your usb, select 'Update files by usb'
5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on remote (READ)
6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP 'off' by using arrow keys and then hitting apply.
8: if channel still doesnt clear, reboot box and router by unplugging both from power and plugging back in (router first)
 
Last edited:
Thanks once mate...the things is I already tried all those steps but still no results...the guy said to me the codes are mgcam so there is no point in trying on cccam....but I can send to you the codes to see if they are working and hopefully u are person you I can trust...just tell where u want me to send them...
 
just pm me yr line it should be something like this : (the one below is an example)

CWS = a.server.com 11111 abcdefg 4320985432 01 02 03 04 05 06 07 08 09 10 11 12 13 14


also clear your inbox as its full i cant send you a private message...
 
Last edited:
ok...i checked the line you sent me in Cccam and Mgcamd and its not working.....must be something to do with server you are connected to....i did a ping test and that was fine..

double check yr line is that correct ?....you can easily enter it wrong..

clear yr inbox...cant send you pm
 
Last edited:
I found best method was to use a dummy.cfg file on USB stick, update it in Wordpad and upload via USB Menu
 
I found best method was to use a dummy.cfg file on USB stick, update it in Wordpad and upload via USB Menu
How do you use notepad or word pad to make .list file which newcamd uses. That would help if one can make newcamd .list and update thbough USB
 
just save as .list with notepad or rename to .list.

as stated earlier change n: to CWS =

then save as newcamd.list on usb

plug usb in
goto mgcamd
goto update file
add or ok newcamd.list
read then exit
reboot and should be done
 
i did rename the file to .list but it didn't work for me, f3 did not recognize it from the usb
 
i did rename the file to .list but it didn't work for me, f3 did not recognize it from the usb

so on your usb when you plug it into pc you should have a file called newcamd.list. when you open that file with notepad you should see your line which should look something like this.
CMS = server 00000 wwwww xxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14
 
i copied the original file, sent to me via email, into notepad and save as mgcamd.list. it is a mgcamd file, so when i tried copying from usb to stb reciever it says ''mgcamd not found. my f3 is working with .list done for me by a very nice from member. i just want know how to make .list file when this one run out of time
 
To load from usb file needs to be called newcamd.list even though you are using mgcamd. There is nothing special about list file it is just a txt file renamed with your line in it as shown in my previous post.
 
can anyone recommend somewhere to get a stable cline?
 
Back
Top