KNX EXAM Questions & Answers installation:
These questions and answers will help you pass the KNX BASIC EXAM
Exam is based on the KNX INSTALLATION
This exam paper has approximately 70 questions based on the knx eib exam, this is a perfect study guide test and exam preparation tool. this questions are in the true or false method.
Sample Questions:
362 KNX Installation
The shielding of the KNX/TP cable must be connected to the equipotential bonding bar
FALSE
363 KNX Installation
If available, the second twisted pair must always be connected through
FALSE
364 KNX Installation
Only green-coloured cable approved or certified by KNX Association will ensure that the KNX TP signalling functions correctly when the required distances are taken into account
TRUE
365 KNX Installation
When the maximum distance per line segment of 1000 m is exceeded, proper signalling can only be ensured when using a terminating resistor
FALSE
366 KNX Installation
A SELV network may be earthed
FALSE
367 KNX Installation
When using a KNX TP central power supply unit of 640 mA, it is always possible to install at least 64 devices
FALSE
368 KNX Installation
Some chokes have a reset switch by means of which it is possible to short-circuit the bus line. This will cause the connected bus devices to execute a reset
TRUE
All KNX Exam Links
1) KNX EXAM - Question and Answers - No1 - SYSTEM ARGUMENTS
2) KNX EXAM - Question and Answers - No2 - BUS DEVICES
3) KNX EXAM - Question and Answers - No3 - SYSTEM OVERVIEW
4) KNX EXAM - Question and Answers - No4 - INSTALLATION
5) KNX EXAM - Question and Answers - No5 - TELEGRAMS
6) KNX EXAM - Question and Answers - No6 - TOPOLOGY
7) KNX EXAM - Question and Answers - No7 - ETS
8) KNX EXAM - Question and Answers - No8 - COMMISSIONING
These questions and answers will help you pass the KNX BASIC EXAM
Exam is based on the KNX INSTALLATION
This exam paper has approximately 70 questions based on the knx eib exam, this is a perfect study guide test and exam preparation tool. this questions are in the true or false method.
Sample Questions:
362 KNX Installation
The shielding of the KNX/TP cable must be connected to the equipotential bonding bar
FALSE
363 KNX Installation
If available, the second twisted pair must always be connected through
FALSE
364 KNX Installation
Only green-coloured cable approved or certified by KNX Association will ensure that the KNX TP signalling functions correctly when the required distances are taken into account
TRUE
365 KNX Installation
When the maximum distance per line segment of 1000 m is exceeded, proper signalling can only be ensured when using a terminating resistor
FALSE
366 KNX Installation
A SELV network may be earthed
FALSE
367 KNX Installation
When using a KNX TP central power supply unit of 640 mA, it is always possible to install at least 64 devices
FALSE
368 KNX Installation
Some chokes have a reset switch by means of which it is possible to short-circuit the bus line. This will cause the connected bus devices to execute a reset
TRUE
All KNX Exam Links
1) KNX EXAM - Question and Answers - No1 - SYSTEM ARGUMENTS
2) KNX EXAM - Question and Answers - No2 - BUS DEVICES
3) KNX EXAM - Question and Answers - No3 - SYSTEM OVERVIEW
4) KNX EXAM - Question and Answers - No4 - INSTALLATION
5) KNX EXAM - Question and Answers - No5 - TELEGRAMS
6) KNX EXAM - Question and Answers - No6 - TOPOLOGY
7) KNX EXAM - Question and Answers - No7 - ETS
8) KNX EXAM - Question and Answers - No8 - COMMISSIONING