fta 101 setup guide for newbies

jon2005

Inactive User
Joined
Jun 8, 2005
Messages
409
Reaction score
4
FTA101 - HOW TO UPDATE KEYS MANUALLY....




Step by step on how
to enter the codes:


1. Press "MENU" then press "-> ->" to "CHANNEL EDIT" and scroll down
to "CODE" then press "OK".

2. In the password box that comes up enter "1010" and press "OK".

3. This will now take you to the "CAS SYSTEM MENU", scroll down
to "NEGRAVOSION" and press "OK".

Now you should see 3 boxes of numbers/letters and just above a
provider name.

4. Hightlight the "PROVIDER ID" and press "->" till you reach NTL.

Now you should have 2 key numbers for your provider "key 00"
and "key 01"

================================================== ==========
NTL:codes

KEY 00...... C2 4B 40 0F B3 EO 7E BF <example key

KEY 01...... D4 3E 8B 65 51 6A 60 6D <example key
================================================== ==========


5. Hightlight the "key number" and press "->" and it should move
between (00-01)
00 = key00 and 01 = key01

6. Now set it to "00" and press down to "key". Enter the key00 above.

7. Go back and hightlight "KEY" and press "->" till it says "01"
then hightlight "key" again and enter key01 above.

8. Now both keys have been entered press "ok" to store.
(wait till the store on the screen stops flashing)

9. Now press EXIT EXIT AND EXIT so your back on your viewing screen
try one of your movie channels
for best source.

If your channel still does not come up its not a worry, all we have
to do is turn negravision back on.
To do this, repeat steps 1 and 2 and you should end up back at
the "CAS SYSTEM" menu.

Scroll down to hightlight "NEGRAVISION".

In the top right of the screen it should say "on" or "off", if
its "off" press "->" and
a password box will come up, enter code "0000". This should now
switch it "ON" and all you need to do is presss "EXIT" to
your viewing screen and now it should be working.
 
Back
Top