script commands when hit bug?

Dunchippin

Inactive User
Joined
Sep 28, 2004
Messages
254
Reaction score
0
hi all, what are the commands and what do they mean that are written to the card to open it when the bug is hit "we hit our bug" obviously we have found a bug in the card that we exploit when glitched,when this is found am i right in thinking the script then writes some kind of command that allows us to open with nagra? i say this as i have a locked rom7 704 which prtgs-cm cannot open but if i glitch the card with the a82 script it says "we hit our bug " and "a82 cam should be open" obviously it hasnt opened because its a rom7 and not rom 10 A82, but obviously the script has found the bug now surely its a case of finding the write commands to write to the card to open it ! i.e by maybe adjusting the a82 script ? any help/guidance would be appreciated as iam a novice to testing like a lot of people on this forum, i may be totally wide of the mark but experimenting is the only way to learn right? :Cheers: sorry 1 more question what part(where abouts ) of the 5c01 a82 script writes the command to open the card?
 
Sorry bud but it is a little more than that. Timing would be a factor which bug to glitch and so on including a new cmd03. The cmd03 is what unlocks the cards the glitch just basicly bypasses the cards cmd03 protection to allow the cmd03 to run.

As for which cmd actually unlocks card it is a little more complicated than that cuz certain cmd's setup the card for the cmd03 to unlock the card. But this is the cmd that unlocks the card:
21005CA0CA00005603545CF7108105FACD7AB7C0A1A6004A153319E1FB5B6348507E8E46A21DEFD37116179E4C5266B6DB4C596CD86FD9E7FF65D1638E1BAE6D2925D9B88446EDD99EEF33A3A16AADBDF3468206679CC0BD06F685AEE418765C
 
oh boy ! what a learning curve this is going to be lol !!! thanks for the reply is appreciated m8! so basically that fact that the script shows it hit the bug means nothing at all . ok cheers
 
what are the variables when setting up a script i have 4 a82 cards that just don't glich, the script just runs and runs. I have opened some so i know it's not the hardware.

do you have to adjust the pot on the loader or are all the changes made in the script.

i've made a few changes using info i found in slickvguys vcc analsyer that gives top and bottom suggested limits but this hasn't worked, it doesn't give you any suggested delays.

any help would be great.
 
Back
Top