What cards still work?

cableguy101

Inactive User
Joined
Mar 25, 2007
Messages
35
Reaction score
0
Hi all

we all know that funs are down,but what cards are still working, mosc still work but what about tit 2 cards?
 
I can only confirm mosc...but i assume only mosc will be working. Hope someone else can confirm
 
both tit2 and opos still work as I tested some earlier that I had lying around - prior to putting up for sale on monday
 
yes you are probally still on 3.6 software or have a no mod update box still on old software
 
Hi

What the OP really wants to know is what cards work where the 3.7 update has took place. In the areas where the funs/atmegas still work its cos you still on 3.6

Regards
 
fun 4 card hack

Hi there im just wondering if anyone has had a fun 4 hack yet or if it cant be done can we still use mosc cards also how much are they ? and if im right will i be able to get net id and box key out of fun 4 card and reprogam the mosc card will this be ok thank you for your time .
 
on 3.7 software the following cards still work.

opus
tit2
mosc
maybe tit1 but not tested.
if you have not got any of the above cards and use a fun atmega presently i would do a no update mod lively lol before you get a 3.7 update..
also if your box is on cr1 say bye to it when they update to 3 .7

:BLOBBY:
 
What is a "no update mod", and how do I do one ???

I run 2 Atmega-powered boxes right now (Pace 4000 and SA4000DVB)

Thanks
 
on 3.7 software the following cards still work.

opus
tit2
mosc
maybe tit1 but not tested.
if you have not got any of the above cards and use a fun atmega presently i would do a no update mod lively lol before you get a 3.7 update..
also if your box is on cr1 say bye to it when they update to 3 .7

:BLOBBY:

How do you do a no update mod? that has passed me by.
 
What is a "no update mod", and how do I do one ???

I run 2 Atmega-powered boxes right now (Pace 4000 and SA4000DVB)

Thanks

HI m8 the 4000 is not hard to do you need to remove a cap and a resistor,
look for the samsung 133 chip near the ribbon cable u5602,then see the big cap c9103 see to the right of this you will see 4 little caps/resistorsin a square with the bottom right missing remove the top left 1 its silver brown where the other 2 are black silver..now look at the top of the sammy 133 chipyou will see arow of resistors theres 4in the row with 2 missing remove the 2nd 1 from left to right..if you get that i cant upload a photo prob down to post count have a search for 4000 no update mod it may show you a pic
the sa4000 i cant help you with
 
that depends on the model you want to stop updateing and the area you live m8
Hi m8,
Its for pure in glasgow. I have a 2100 a 4010 and a 4001,and subbed heavily on main one for all progs.. My kids use for disney on the 2 pace. 1 atmega and 2 fun 4s' are what I have used.
I am sure there are thousands who have totally forgot how to,when anything goes upside down with cards/boxes, as it has been flowing away nice and easy for past couple of years. I am very rusty with inside of boxes and would need a pic and tut to do any work.
I need to ask tho, what is the outcome of doing a mod to stop update? is it future proof or would it need re soldered to get any channels and cards done in maybe a few months down the line? I really would need to know if its worth it. As to the fact the industry is possibly moving on with any box or card ,what is the feeling on here for just continuing with cards we all use on here to be used for getting our progs with new keys etc,,every now and then,or is there something really about to change big time?
 
the 4010 is the same as the 4000 see my post above have a search for a photo has i cant upload 1.the 2100 the update mod has never been released for that...and the 4001 i believe invloves lifting a leg of the attys to the battery which is very tricky
good luck
 
Thanks Longcon.
I am sure I will find it difficut no matter what.
All advice appreciated
 
Thanks Longcon.
I am sure I will find it difficut no matter what.
All advice appreciated


unless youve got a spare 2 chip sim its not worth the hassle on a 4001 m8, {otherwise you will have to disable the 2 atmels on the sim in your box}

now if ntl is anything like excw then the noupdate mod wont work on any box with 4 atmels:ie 1000 model etc if its running on the newer software...tw is ok
4001 similer box to a 1000

pointless doing a 4000, i heard funs work with this

2100,solder bridge pins 7 and 8 on the netid chip with a piece of wire.... now i havn't tried this myself but i dont see why it shouldn't work mainley because of certain data thats stored in this chip .
 
Hi
I have tried an opos card and it doesn't work for in in 3.7 area.

I have used opos files dated 02/12/2008, so not sure what I am doing wrong, any help would be appreciated. I am also having ago at trying to fix the Atmega cards so will update you when I have got my head round the code.
 
Back
Top