master channel 1.2 please help..

hello
please help...
I have a master channel 1.2 dish and i want to motorized
Can i use like SG2100 motor with DiSEqC1.2 receiver to move this dish?
I need an adapter plate to attach this motor to the dish or
I need to use the HH mount like Jaeger 1224 HH mount?
I'am a bit confuse i really want to motorized my dish by my becouse i ask to few people and is cost my about £500 to install
thank you
best regards
franaganmc

The SG2100 will not be suitable for the 1.2m dish as it will not cope.
You will need a minimum 18" or possibly a 24" actuator working from a 36V positioner or STB with built in 36V.The HH using an actuator will provide you with Horizon to Horizon positioning,depending upon where you site the dish.I'm sure if you look around the forum there is something around .

Others will help try Digidude

thanks nohiddingplace
so I need to use the HH mount like Jaeger 1224 HH mount? with the
24" actuator working from a 36V positioner or STB with built in 36V.?

check link may be of further use,tried PM but you don't accept.

http://www.satellitesuperstore.com/motors.htm