NOKIA Media Master 9800S DVB Satellite Receiver

darkmage

Inactive User
Joined
Sep 27, 2005
Messages
36
Reaction score
0
hi all
i have just bought this pice of kit and was wondering if anyone had one and had flashed it
all guidence would be great as i am moving from nthell to sat box due in a few days i have found this http://europe.nokia.com/A4144547#1
and this
How to upgrade Nokia 9800s using download server program.


Equipment:

Computer with serial COM port.
Serial 9-pin null-modem cable.
SerialServer program.

Procedure:

1. Save the files SerialServer.exe and the download file sysSW.dl in the
same directory. Make sure that the Set-top-box is disconnected from the
power supply and no other program uses the COM port you wish to use
for the download.

2. Decide if you want to use communication port COM1 or COM2 and
press "Options" to set the right port. Also make sure that the following
communication parameters are set in the control panel, port settings:
* bits/second: 19200
* data bits: 8
* stop bits: 1
* parity: none
* flow control: hardware (or maybe none)

3. Press "Open Image" and select the file that should be downloaded to
the box [typically sysSW.dl]. (This file has been created with dsmcc_tool)

4. Press "Start Download" and plug in the set top box.

5. Wait about 15 minutes until the download is complete. The front
display will indicate how many percent of the download that is still
remaining.

6. After the download, press "Exit".
and have files but i was wondering how they run i hear like a dbox 1


if anyone has any clue on how its done and also how to set up the motorised dish etc would be great to hear from you

regards
 
Last edited:
I've moved this post to here since this receiver is not a box that accepts linux images (afaik), so not relevant in the dreambox room.
Maybe someone else can advise if there are any patches or support for this box anywhere?
Regards.
 
it's a generic box like the 9850T used by on-digital, just with a sat tuner.

it's not bad with a cam,

but if you know someone who can lift & flash tsop ic's then flashing it with 9701s or 9850T software & then using a serial cable to upgrade it to BBOX151 is good.

bbox has a built-in emulator :)


if you can get someone to flash the chips then i can post the 9850T stuff later - just ask.
: dipsy :
 
i have the premier software and latest images for it which i can upload if anyone wants but i cant test till box arrives :( if they do the same as the 9850T software ith out ic programing but i can buy a programer if needed lol
 
starting from scratch you would need to spend atleast 200 on gear, so drop that idea.

there are 2 software platforms on that box,
OpenTV used by the 9800s, 9820T,9828T and a lot of others,
MediaHighway used by ONdigital(9850T), 9701S etc.


the MHW bootloader will let you read and write the flash without problems, but only to write MHW firmware - not OpenTV.

couple of years back i hacked the shit out of those boxes :)
there are about 12 in the range sold globally,
each has different software, and variations in tuner, and number of card/cam slots.
 
hi all
i have just bought this pice of kit and was wondering if anyone had one and had flashed it
all guidence would be great as i am moving from nthell to sat box due in a few days i have found this Nokia Europe - Nokia Mediamaster 9800 S - Support
and this
How to upgrade Nokia 9800s using download server program.


Equipment:

Computer with serial COM port.
Serial 9-pin null-modem cable.
SerialServer program.

Procedure:

1. Save the files SerialServer.exe and the download file sysSW.dl in the
same directory. Make sure that the Set-top-box is disconnected from the
power supply and no other program uses the COM port you wish to use
for the download.

2. Decide if you want to use communication port COM1 or COM2 and
press "Options" to set the right port. Also make sure that the following
communication parameters are set in the control panel, port settings:
* bits/second: 19200
* data bits: 8
* stop bits: 1
* parity: none
* flow control: hardware (or maybe none)

3. Press "Open Image" and select the file that should be downloaded to
the box [typically sysSW.dl]. (This file has been created with dsmcc_tool)

4. Press "Start Download" and plug in the set top box.

5. Wait about 15 minutes until the download is complete. The front
display will indicate how many percent of the download that is still
remaining.

6. After the download, press "Exit".
and have files but i was wondering how they run i hear like a dbox 1


if anyone has any clue on how its done and also how to set up the motorised dish etc would be great to hear from you

regards
Hi SIR,
Which program I should use ( for upgrading a firmware of NOKIA 9800S to MA 2.0)to
detect correct transfer of date from PC Com port to sat receiver rs 232 socket.How do I
know whether handshaking has been established ?
Thanks for your help/
RGDS
 
Back
Top