[DM800SE] wierd motor fault

ok, my motor is working fine except its not moving proprly,

example

28.2e to 13.0e moves no problem
28.2e to 19.0e moves no problem
13.0e to 19.0e tune failed

i need to go back to 28.2e to go anywhere. is there something im doing wrong? my usals are fine my channel list is only a couple of weeks old, (using catseyes)

its like as if its just being stubborn.

just to add, i need to restart enigma to make it go too.

How old is the motor? Sounds like there may be a bit of backlash (or play) in the gears.

less than a year, i had to buy a new one cos the one i had seized.

First thing id do is try a couple of different channel list see if there is a difference.

If your running a Openpli image then try up the millamps to the motor a little it may help.

how much do u reckon? 75?

its not the channel list matey, ive tried a few.

Have you tried a software reset on the motor with the Goto function or even a hardware one go outside reset with buttons to clear the Sat table inside the motor as it may have become corrupt

thanks guys, ill try tmrw.