dm 800 hd se

marrtin

Inactive User
Joined
Oct 19, 2013
Messages
3
Reaction score
0
hi everyone can anybody help me I hav a dm800 hdse. im newb for this. I put on and nothing happening only a screen com says on it sunray4. I tried tuning auto but it says nothing to scan no service. please help me wat to do. do I need a new image for that if yes tel me were to find it and how can I flash it
 
ok first off mate which sim do you have installed?
turn box off and look under it, you should see a little gold sticker. if not turn box back on and on box display it should say sim and a number next to it
 
It should have an image on it
Have you set up the tuner configuration?


Press menu have a look through set up and get familiar with the menu :) set up tuner

Better still I would flash one of the many backup images that are pre set up :)
 
If you go into tuner configuration screen

Menu-Setup-Service Searching-Tuner configuration
Press OK button and then set it to

Simple
Single
28.2E Eutelsat....
no

Then go back out to Manual Scan,saving as asked,

Set type of scan to Single satellite and chose 28.2E again
Then press OK to scan
 
what dish set up have you fixed or motorised?

sim2 which bootloader?

plenty images about to try
 
check elevation and azimut
there are good aps for iphone to check
 
Is the cable connected properly both ends?
 
Back
Top