Found this on another site...
New Enigma2 Release 3.2.2 and driver update for all HD Dreambox
February 28th, 2012 | Author: dvdmaniac
Just in time for a new weekend Enimga2 release and new drivers for all HD Dreambox were published. This is probably the last release Enigma2 with old kernel!
Improvements in Enigma2
Compared to the last release version 3.2.2 brings bugfixes mainly only with more or less well-known problems. This is before the changeover to the new kernel and the experimental images are soon expected to create a stable state.
Thus improved, especially the Mount and Device Manager. It made several improvements and bug fixes and added a support for USB and CF disk. This was also the hotplug support working, this should now work fine – this applies to those who plug in the ongoing operation of the Dreambox such as a USB flash drive. In addition, it is attempted to show the file system automatically. This is especially important and useful if the disk is not formatted to ext3 but in FAT32 or NTFS.
Moreover, in the course of the update also worked on the blind scan support, which should now also work with Universal LNB. Sporadic crashes after a recording should now belong to the past.
Gives the detailed changelog enigma2 changes it here .
Driver update for HD Dreambox
In addition to the update Enigma2 there are new drivers again – this time for all HD Dreambox: DM800, DM800SE, HD DM500, DM8000 and DM7020 HD.
There is an important innovation that affects users who operate their Dreambox to a TV or monitor to the DVI connector. With the new drivers the DVI-fallback has been dropped. This occurred when no EDID HDMI, so if no connected TV detected. This is no longer the case here because there were problems with some TVs.This also means, however, that the Dreambox can now, under certain circumstances (it does not seem to happen every time) is not more easily operate on a DVI connector. Affected should this update or not but if the update has already gone through, import the old driver again. However, it is already working on a solution that would at least come with the next update.
Update: As soon published the article, there is already a legend of solution to the problem! Apply it over the course of the day for the images are available. The changelog is appropriate for it here .
It was also worked on the DVB-C/T-Tuner. This should now finally with active antennas (5V output) work effectively.
The changelog is accurate to the driver update it here .
Update on the new version
As usual, this update comes as an online update. Users of the experimental images of Dream was already on the weekend update on the new version. A flashing a new image in this update is not necessary!
Usually it takes a few days longer, until the team’s own image-update provides. Here it is worth it to wait for a manual update is for the Enigma2 innovations not possible and not with the driver update recommended for novice users. At the latest this week should have been added for each via online update.
Changelogs for Enigma 2 can be found
HERE
